Sommet Slab Black

Regular

3.00

Jeremy Dooley

www.insignedesign.com

Sommet Slab is a trademark of Jeremy Dooley.

Copyright (c) 2010 by Jeremy Dooley. All rights reserved.

The Font-Software and any updates upgrades, additions or modified versions are the intellectual property of Jeremy Dooley. (DooleyType)You are licensed to use the software on one computer, unless additional licenses are purchased or a multi-license agreement is reached.You are only allowed to transfer or assign the Font-Software to a third party if you do not retain any copies of the Font-Software in whole or in part.Only for the purpose of outputting particular files may you take a copy of the font(s) you have used for such files to a commercial printer or other service bureau.Embedding of the Font-Software into electronic documents or internet pages is only permitted in a secured read-only mode. Licensee must ensure that recipients of electronic documents or internet pages cannot extract the font software from such documents or use the embedded font software for editing purposes or for the creation of new documents. DooleyType is not responsible for any problems that may arise from the use of the fonts, such as computer malfunctions, etc. DooleyType is additionally not responsible for idle time, shortfall of production, waste of material and any other direct, indirect, incidental or consequential damages that are caused by our Font-Software. In the event of a problem that the font file(s) does not work, DooleyType would only provide a replacement for the font(s) you ordered.Upon termination of this Font-Software License Agreement, you agree to either return or to destroy and refrain from using the Font-Software, the media, copies and/or any modified or merged portions thereof. You agree to inform your employees or any other person having access to the Font-Software and copies thereof, of the terms and conditions of this Font-Software License Agreement and to ensure that they shall strictly abide by these terms and conditions.

VTC-KomikaHeadLinerTwo

Wide

1.000 2010 initial release

WolfBainx - Larry E. Yerkes, Vigilante Typeface Corporation.

WolfBainx - Larry E. Yerkes, Vigilante Typeface Corporation.

VTC-KomikaHeadLinerTwo is a trademark of WolfBainx - Larry E. Yerkes, Vigilante Typeface Corporation.

Copyright 2010, WolfBainx - Larry E. Yerkes, Vigilante Typeface Corporation and Associates All rights reserved. This Font is free for personal non-commercial use and not to be used for commercial purposes without permission of the copyright holder or by purchasing those rights from Vigilante TypeFace Corp. Vigilantetype@gmail.com

Copyright 2010, WolfBainx - Larry E. Yerkes, Vigilante Typeface Corporation and Associates All rights reserved. Vigilantetype@gmail.com

Copyright 2010, WolfBainx - Larry E. Yerkes, Vigilante Typeface Corporation and Associates All rights reserved. This font should not be distributed without a License and is not to be modified in any way.This includes Converting into Vectors,Stitching patterns,etc...for the purpose of selling this font in another format without purchasing those specific rights from me.You may not take the Individual designs out of my fonts, Digitize them in any format, such at cross stitch or embroidery patterns and Re-Sell them without a binding contract with myself.If you use this font on a free website I require proper credit is given along with a copy of this license of use to be distributed along with the font file.If you wish to use this font commercially, you must purchase a commercial license to do so. please send information detailing usage and the font youre interested in buying so that a return email can be sent as proof of rights to commercial usage along with the commercial version of the specified font. Feel free to have fun and photoshop away and modify the look any way you wish in that type of way. All I ask is that you not modify the actual font Code Itself.Especially for the purpose of selling one of my letter faces.This Font is provided free for personal non-commercial use and not to be used for commercial purposes without permission of the copyright holder or by purchasing those rights from the copyright holder me.You may not sell this font, but are allowed to distribute it freely i.e. in magazines,blogs,etc.. You may share the font electronically but the Zip file must remain intact with the font alongside all other files as packaged.This font may not be sold in any way shape or form without my permission in writing.Please send me an email if you are hosting this font so I may add it to my links list once I finish my website. Email: vigilantetype@gmail.com for any questions or to purchase the rights to use this font in a commercial venture.best regardsLarry E YerkesWolfBainXvigilantetype@gmail.comThe following are my websites currently where I can be reached.http://www.myspace.com/wolfbainx - http://wolfbainx.deviantart.com/ - http://www.facebook.com/wolfbainx

motorcycle

Regular

1.00 January 19, 2012, initial release

www.dafont.com wino-s-kadir.d2209

weknow Trademark of (http://www.dafont.com/wino-s-kadir.d2209).

weknow (weknow.deviantart.com). 2012. All Rights Reserved

This font was created using FontCreator 5.5 from High-Logic.com

StealWerksOpenRegularW00-Rg

Regular

1.10

Jonathan Hill

Jonathan Hill

StealWerksOpen Regular is a trademark of Jonathan Hill.

Copyright (c) Jonathan Hill, 2006. All rights reserved.

http://t26.com

By installing any T26 font on your computer, you agree to the terms set forth in the T26 End User License Agreement (EULA) at http://www.t26.com/eula/

Msn Weird

Regular

1.00 October 29, 2007, initial release

Typeface (your company). 2007. All Rights Reserved

This font was created using FontCreator 5.5 from High-Logic.com

Euro Collection

Normal

1997; 1.5

M. Strockis & A. Svensson

M. Strockis & A. Svensson

M. Strockis and A. Svensson, 1997.

The Euro currency symbol in various styles.

VDS

Thin

1.000 2012 initial release

artmaker

artmaker

VDS Thin is a trademark of artmaker.

Copyright (c) 2012 by artmaker. All rights reserved.

Copyright (c) 2012 by artmaker (Anna Pocius). All rights reserved. VDS Thin typeface creation inspired by Rihards Funts (rijada.lv).

SIL Open Font License

MinusPlus

Regular

1.00 June 23, 2013, initial release

Xerographer Fonts

Xerographer Fonts Max Infeld

Typeface (your company). 2013. All Rights Reserved

This font was created using FontCreator 6.0 from High-Logic.com

maxinfeld@hotmail.com

Particulator II

Regular

1.0

http://fontstruct.com

Andrew McCluskey

FontStruct is a trademark of FSI FontShop International GmbH

Copyright Andrew McCluskey 2012

Particulator II was built with FontStruct

Creative Commons Attribution Non-commercial

DHF Happy Birthday Ryan

Italic

2.000

Dexsar Harry Fonts (DHF)

Dexsar Harry Anugrah

DHF Happy Birthday Ryan is a trademark of Dexsar Harry Anugrah.

Copyright 2012 by Dexsar Harry Anugrah. All rights reserved.

The special font for my brother Ryan.This Font Just Free For Personal Use ONLY! For Cormercial Use, Email : dexsar.harry@gmail.com

Free For Personal Use ONLY! For Cormercial Use, Email : dexsar.harry@gmail.com

Londrina Sketch

Regular

1.001 2011

Marcelo Magalhaes

Marcelo Magalhaes

Londrina is a trademark of Marcelo Magalhaes.

Copyright (c) 2011 by Marcelo Magalhaes (marcelomagalhaes.net), with Reserved Font Name Londrina

This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is available with a FAQ at: http://scripts.sil.org/OFL

MetronicProCondensedW01-Lt

Regular

2.00

Mostardesign Studio - Olivier Gourvat

Mostardesign Studio - Olivier Gourvat

Metronic Pro is a trademark of Mostardesign Studio.

Copyright (c) Olivier Gourvat - Mostardesign Studio, 2014. All rights reserved.

All Rights Reserved. This software is the property of Mostardesign Studio - 2004 / 2015Incorporated and its licensors, and may not be reproduced, used, displayed, modified, disclosed or transferred without the express written approval of Mostardesign. Please contact us to learn more about license restrictions.

TalisCThinW00-ThinItalic

Regular

1.10

Eurotypo

Olcar Alcaide

Talis C Thin Italic is a trademark of Eurotypo.

Copyright (c) 2012 by Eurotypo. All rights reserved.

By installing any Eurotypo font on your computer, you agree to the terms set forth in the Eurotypo End User License Agreement (EULA) which can be found at http://www.eurotypo.com/eula/. Use of this font software by unlicensed parties is expressly prohibited.

By installing any Eurotypo font on your computer, you agree to the terms set forth in the Eurotypo End User License Agreement (EULA) which can be found at http://www.eurotypo.com/eula/. Use of this font software by unlicensed parties is expressly prohibited.

Tall Boy 3D

Regular

1.0

Out Of Step Font Company

Copyright Out Of Step Font Company 2013Tall Boy 3D is based on Tall Boy West by Out Of Step Font Company (http://fontstruct.com/fontstructors/flamehog35)

Creative Commons Attribution Non-Commercial Share Alike

AEZ blocky

AEZ blocky

1; Jan 2003

Anastacia E. Zittel

Created using copyright free clip art found on the web.

Freeware font, free to use for personal use only.

made using Data Becker & Font Creator programs

FirstGradeW90-Regular

Regular

1.20

m u r

Richard Moore

First Grade is a trademark of m u r.

Copyright (c) 2008 by m u r. All rights reserved.

Copyright (c) 2008 by m_u_r. All rights reserved.

FGJackyW00-Regular

Regular

1.00

Font Garden

FG Jayden is a trademark of Font Garden.

Copyright (c) 2007 by Font Garden. All rights reserved.

Copyright (c) 2007 by Font Garden. All rights reserved.

RapierW01

Regular

1.1

Linotype GmbH

Martin Wait

Rapier is a trademark of International Typeface Corporation.

Part of this font software is copyrighted 2006 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH. Copyright Esselte Letraset Ltd., 1990.

Rapier, designed by Martin Wait for ITC in 1989, is an impulsive, energetic script font with strong ties to the brush and advertisement typefaces of hte 1940s. The zestful capitals contrast with small, narrow lower case letters, lending the font its dynamism and liveliness. Desinger Wait reached the energetic, almost aggressive feel of Rapier with snappy base forms and especially with ascending strokes. For an optimal look it is advisable to set Rapier's forms near to one another, so that the ends of the strokes of one figure touch the beginning of the next. Rapier is best used for headlines and short texts.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this font software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This font software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this font software is limited to your workstation for your own use. You may not copy or distribute this font software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informations concernant le contrat d'utilisation du logiciel de polices, veuillez consulter notre site web www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418

BurfordW01-ExtrudeB

Regular

1.00

Kimmy Design

Kimmy Kirkwood

Burford Extrude B is a trademark of Kimmy Design.

Copyright (c) 2014 by Kimmy Design. All rights reserved.

END USER LICENSE AGREEMENT This copy of Burford (Font Family) (the Software Product) and accompanying documentation is licensed and not sold. This Software Product is protected by copyright laws and treaties, as well as laws and treaties related to other forms of intellectual property. Kimmy Design or its subsidiaries, affiliates, and suppliers (collectively KD) own intellectual property rights in the Software Product. The Licensee's (you or your) license to download, use, copy, or change the Software Product is subject to these rights and to all the terms and conditions of this End User License Agreement (Agreement). Acceptance YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT BY SELECTING THE ACCEPT OPTION AND DOWNLOADING THE SOFTWARE PRODUCT OR BY INSTALLING, USING, OR COPYING THE SOFTWARE PRODUCT. YOU MUST AGREE TO ALL OF THE TERMS OF THIS AGREEMENT BEFORE YOU WILL BE ALLOWED TO DOWNLOAD THE SOFTWARE PRODUCT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU MUST SELECT DECLINE AND YOU MUST NOT INSTALL, USE, OR COPY THE SOFTWARE PRODUCT. License Grant This Agreement entitles you to install and use one copy of the Software Product. In addition, you may make one archival copy of the Software Product. The archival copy must be on a storage medium other than a hard drive, and may only be used for the reinstallation of the Software Product. This Agreement does not permit the installation or use of multiple copies of the Software Product, or the installation of the Software Product on more than one computer at any given time, on a system that allows shared used of applications, on a multi-user network, or on any configuration or system of computers that allows multiple users. Multiple copy use or installation is only allowed if you obtain an appropriate licensing agreement for each user and each copy of the Software Product. Restrictions on Transfer Without first obtaining the express written consent of KD, you may not assign your rights and obligations under this Agreement, or redistribute, encumber, sell, rent, lease, sublicense, or otherwise transfer your rights to the Software Product. Restrictions on Use You may not use, copy, or install the Software Product on any system with more than one computer, or permit the use, copying, or installation of the Software Product by more than one user or on more than one computer. If you hold multiple, validly licensed copies, you may not use, copy, or install the Software Product on any system with more than the number of computers permitted by license, or permit the use, copying, or installation by more users, or on more computers than the number permitted by license. You may not decompile, reverse-engineer, disassemble, or otherwise attempt to derive the source code for the Software Product. You may not use the database portion of the Software Product in connection with any software other than the Software Product. Restrictions on Alteration You may not modify the Software Product or create any derivative work of the Software Product or its accompanying documentation. Derivative works include but are not limited to translations. You may not alter any files or libraries in any portion of the Software Product. You may not reproduce the database portion or create any tables or reports relating to the database portion. Restrictions on Copying You may not copy any part of the Software Product except to the extent that licensed use inherently demands the creation of a temporary copy stored in computer memory and not permanently affixed on storage medium. You may make one archival copy which must be stored on a medium other than a computer hard drive. Limited Software Product Warranty For a period of 10 days days from the date of shipment or from the date that you download the Software Product, as applicable, KD warrants that when properly installed and used under normal conditions, the Software Product will perform substantially as advertised. Disclaimer of Warranties and Limitation of Liability UNLESS OTHERWISE EXPLICITLY AGREED TO IN WRITING BY KD, KD MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, IN FACT OR IN LAW, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OTHER THAN AS SET FORTH IN THIS AGREEMENT OR IN THE LIMITED WARRANTY DOCUMENTS PROVIDED WITH THE SOFTWARE PRODUCT. KD makes no warranty that the Software Product will meet your requirements or operate under your specific conditions of use. KD makes no warranty that operation of the Software Product will be secure, error free, or free from interruption. YOU MUST DETERMINE WHETHER THE SOFTWARE PRODUCT SUFFICIENTLY MEETS YOUR REQUIREMENTS FOR SECURITY AND UNINTERRUPTABILITY. YOU BEAR SOLE RESPONSIBILITY AND ALL LIABILITY FOR ANY LOSS INCURRED DUE TO FAILURE OF THE SOFTWARE PRODUCT TO MEET YOUR REQUIREMENTS. KD WILL NOT, UNDER ANY CIRCUMSTANCES, BE RESPONSIBLE OR LIABLE FOR THE LOSS OF DATA ON ANY COMPUTER OR INFORMATION STORAGE DEVICE. UNDER NO CIRCUMSTANCES SHALL KD, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU OR ANY OTHER PARTY FOR INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL, PUNITIVE, OR EXEMPLARY DAMAGES OF ANY KIND (INCLUDING LOST REVENUES OR PROFITS OR LOSS OF BUSINESS) RESULTING FROM THIS AGREEMENT, OR FROM THE FURNISHING, PERFORMANCE, INSTALLATION, OR USE OF THE SOFTWARE PRODUCT, WHETHER DUE TO A BREACH OF CONTRACT, BREACH OF WARRANTY, OR THE NEGLIGENCE OF KD OR ANY OTHER PARTY, EVEN IF KD IS ADVISED BEFOREHAND OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT THAT THE APPLICABLE JURISDICTION LIMITS KD'S ABILITY TO DISCLAIM ANY IMPLIED WARRANTIES, THIS DISCLAIMER SHALL BE EFFECTIVE TO THE MAXIMUM EXTENT PERMITTED. Limitation of Remedies and Damages Your remedy for a breach of this Agreement or of any warranty included in this Agreement is the correction or replacement of the Software Product. Selection of whether to correct or replace shall be solely at the discretion of KD. KD reserves the right to substitute a functionally equivalent copy of the Software Product as a replacement. If KD is unable to provide a replacement or substitute Software Product or corrections to the Software Product, your sole alternate remedy shall be a refund of the purchase price for the Software Product exclusive of any costs for shipping and handling. Any claim must be made within the applicable warranty period. All warranties cover only defects arising under normal use and do not include malfunctions or failure resulting from misuse, abuse, neglect, alteration, problems with electrical power, acts of nature, unusual temperatures or humidity, improper installation, or damage determined by KD to have been caused by you. All limited warranties on the Software Product are granted only to you and are non-transferable. You agree to indemnify and hold KD harmless from all claims, judgments, liabilities, expenses, or costs arising from your breach of this Agreement and/or acts or omissions. Governing Law, Jurisdiction and Costs This Agreement is governed by the laws of California, without regard to California's conflict or choice of law provisions. Severability If any provision of this Agreement shall be held to be invalid or unenforceable, the remainder of this Agreement shall remain in full force and effect. To the extent any express or implied restrictions are not permitted by applicable laws, these express or implied restrictions shall remain in force and effect to the maximum extent permitted by such applicable laws.

MonaBella

Regular

1.00 January 1, 2007, initial release

StudioTypo

MonaBella ?Trademark of StudioTypo.

Typeface ?(your company). 2015. All Rights Reserved

This is limited character demo version. if you would like to consider using it for commercial projects. please visit http://www.studiotypo.com/ Thanks

http://www.studiotypo.com

AdriaGroteskW00-Regular

Regular

1.10

FaceType

Marcus Sterz

Copyright 2013 by Marcus Sterz. All rights reserved.

Copyright 2013 by Marcus Sterz. All rights reserved.

Roundico

Regular

1.0

http://fontstruct.com

Lance De Castro

FontStruct is a trademark of FSI FontShop International GmbH

Copyright Lance De Castro 2011

Roundico was built with FontStruct

Creative Commons Attribution Share Alike

YanusC

Bold

001.000

ParaType,

Copyright (c) ParaType, 1998. All rights reserved.

Designed at ParaGraph in 1997 by Tagir Safayev. Inspired by Neulin Sans of Ray Gun magazine (1996). The first version of the typeface was created as part of corporate identity programme for Aeroflot Russian International Airlines. For use in both text and display matter.

OtamaDisplayW00-UltBlackIt

Regular

3.00

Tim Donaldson

Tim Donaldson

Otama Display UltraBlack Italic is a trademark of Tim Donaldson.

Copyright (c) 2012 by Tim Donaldson. All rights reserved.

Copyright 2013 Tim Donaldson.Tim Donaldson Typeface License AgreementThis Agreement, in conjunction with the receipt that accompanies each purchase from otamatypeface.com (Tim Donaldson), constitutes the complete agreement between you and Tim Donaldson.1. Allowed usesYou may use the licensed fonts to create images on any surface such as computer screens, paper, photographs, movie credits, printed material, T-shirts, and other surfaces where the image is a fixed size.Specialty uses where the font becomes the focal feature, differentiation or selling point of a product or service require and extended OEM license agreement. Please contact TIm Donaldson at design@timdonaldson.com to discuss an OEM license.You may use the licensed fonts to create EPS files or other scalable drawings provided that such files are only used by the household or company licensing the font.2. Number of usersThe maximum number of simultaneous users is specified in the applicable receipt. All users must belong to the same company or household purchasing the font. Each licensed user allows for the font to be installed on 1 workstation (a desktop computer) and one remote portable computer (a laptop). The font may be installed on a network server. The license quantity refers to every single workstation/portable computer combination where the fonts will be used.3. Third partiesYou may provide the font to a graphic designer, printer or other service bureau that is working on your behalf only if they agree to use the font exclusively for your work, agree to the terms of this license, and retain no copies of the font on completion of the work.You may not provide the font or make it accessible to any other third parties, except for embedding described in 4. Embedding.4. Embedding4.a. Electronic Document EmbeddingYou may embed the licensed fonts into any document (eg. PDF) you send to third parties. Such documents may be viewed and printed (but not edited) by the recipients.4b. Web EmbeddingThis license agreement does not allow for web embedding. Contact design@timdonaldson.com for further information about web embedding4.c. Hardware and Software EmbeddingYou may not under any circumstances embed the licensed fonts into software or hardware products in which the fonts will be used by the purchasers of such products. Such use requires an extended license which may be offered by Tim Donaldson. Please contact desgin@timdonaldson.com for further information.5. ModificationsYou may import characters from the font as graphical objects into a drawing program and modify such graphical objects. You may not modify, adapt, translate, reverse engineer, decompile, disassemble, or create derivative works for further retail.6. CopyrightThe font and the accompanying materials are copyrighted and contain proprietary information and trade secrets belonging to Tim Donaldson. You have not brought the fonts as such, just the right to use them in your designs. Unauthorized copying of the Product even if modified, merged, or included with other software, or of the written materials, is expressly forbidden. You may be held legally responsible for any infringement of the Tim Donaldsons intellectual property rights that is caused or encouraged by your failure to abide by the terms of this Agreement.7. TerminationThis Agreement is effective until terminated. This Agreement will terminate automatically without notice from Tim Donaldson if you fail to comply with any provision contained herein. Upon termination, you must destroy the written materials, the Product, and all copies of them, in part and in whole, including modified copies, if any.8. Product UpgradesTim Donaldson may, from time to time, update the Product. Product upgrade pricing may apply.9. Disclaimer and Limited WarrantyTim Donaldson warrants the Product to be free from defects in materials and workmanship under normal use for a period of twenty one (21) days from the date of delivery as shown on your receipt. Tim Donaldson shall have no responsibility to replace the product if failure results from accident, abuse or misapplication, or if any product is lost or damaged due to theft, fire, or negligence. Any replacement product will be warranted for twenty one (21) days. This warranty gives you specific legal rights. You may have other rights, which vary from state to state.EXCEPT AS EXPRESSLY PROVIDED ABOVE, THE PRODUCT, IS PROVIDED AS IS. TIM DONALDSON DOES NOT MAKE ANY WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.The entire risk as to the quality and performance of the Product rests upon you. Tim Donaldson does not warrant that the functions contained in the Product will meet your requirements or that the operation of the software will be uninterrupted or error free.TIM DONALDSON SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FROM LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCT EVEN IF TIM DONALDSON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Because some American states and international countries do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.10. Governing LawThis agreement is governed by the laws of New Zealand.Copyright 2013 Tim Donaldson

Komika Axis

Regular

2.0

WolfBainX & Apostrophe

1999-2001, WolfBainX & Apostrophic Labs. All rights reserved. Visit www.apsotrophiclab.com or email info@apostrophiclab.com for more info.

1999-2001, WolfBainX & Apostrophic Labs. All rights reserved. Visit www.apsotrophiclab.com or email info@apostrophiclab.com for more info.

Alpsoft-Qolyazma3

Regular

3.00 April 8, 2009

Alpsoft Science and Technology Development Co., Ltd., Urumchi.

Tursun Sultan

Trademark of The Alpsoft Science and Technology Development Co., Ltd., Urumchi.

Copyright (c) Alpsoft Science and Technology Development Co., Ltd. 2004-2008, All Rights Reserved.

alpsoft

SF Square Root

Oblique

ver 1.0; 2000. Freeware for non-commercial use.

ShyFonts Type Foundry

SF Square Root Oblique is a trademark of the ShyFonts Type Foundry.

Copyright (c) ShyFonts Type Foundry, 2000. All rights reserved.

SF Square Root Oblique is a trademark of the ShyFonts Type Foundry.

Math3

Regular

1.20

Wolfram Research, Inc.

Andre Kuzniarek, with Stephen Wolfram. Copyright (c) 1996, 1997 Wolfram Research.

1996 Wolfram Research. Data 1996 Glenda de Guzman.

Math3 is a custom font design by Wolfram Research for use with Mathematica, MathReader, and other Wolfram Research products. It is licensed to purchasers of these products, and may not be redistributed without the express permission of Wolfram Research.

MusiQwik

Bold

5.002

Robert Allgeyer

Robert Allgeyer (Aptos, CA USA)

OFL Reserved Name MusiQwik

Copyright (c) 2001, 2008 by Robert Allgeyer. SIL Open Font License.

MusiQwik is a special-purpose music notation font that may be used in word processing documents. Be sure that you embed the font in your documents or re-distribute the font to those who wish to see your music. This is MusiQwik version 5. It has improved compliance with Open Type specifications, minor corrections to some drawings, and a few added glyphs. It may appear at slightly different size than prior versions. To choose the characters, you need a character map utility. The one that comes with your computer should work, but if the pictures are too small then find a third-party utility. The font includes clefs, time signatures, key signatures, and a number of other staff symbols. It also includes elements for constructing notes from 1/1 to 1/8 duration, with or without accidental or dot, at a variety of pitches. This is sufficient for depicting the melodies of most popular songs and church hymns. The companion font, MusiQwikB, contains sixteenth notes. You may use the hyphen (-) key to insert a tiny segment of staff, if alignment of the notes is important. Regular sections of staff are inserted using the equal (=) key.Be sure that word wrapping is turned off, or your staff will break in unexpected locations. This font looks best at 24 point size or larger.

This Font Software is licensed under the SIL Open Font License, Version 1.1. Font Copyright (c) 2001, 2008 by Robert Allgeyer, with Reserved Font Name MusiQwik.

DINNextW01-Italic

Regular

1.1

Linotype GmbH

Linotype Design Studio

Copyright 2010 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH.

DIN Next is a typeface family inspired by the classic industrial German engineering designs, DIN 1451 Engschrift and Mittelschrift. Akira Kobayashi began by revising these two faceswho names just mean condensed and regularbefore expanding them into a new family with seven weights (Light to Black). Each weight ships in three varieties: Regular, Italic, and Condensed, bringing the total number of fonts in the DIN Next family to 21. DIN Next is part of Linotypes Platinum Collection. Linotype has been supplying its customers with the two DIN 1451 fonts since 1980. Recently, they have become more popular than ever, with designers regularly asking for additional weights. The abbreviation DIN stands for Deutsches Institut fr Normung e.V., which is the German Institute for Industrial Standardization. In 1936 the German Standard Committee settled upon DIN 1451 as the standard font for the areas of technology, traffic, administration and business. The design was to be used on German street signs and house numbers. The committee wanted a sans serif, thinking it would be more legible, straightforward, and easy to reproduce. They did not intend for the design to be used for advertisements and other artistically oriented purposes. Nevertheless, because DIN 1451 was seen all over Germany on signs for town names and traffic directions, it became familiar enough to make its way onto the palettes of graphic designers and advertising art directors. The digital version of DIN 1451 would go on to be adopted and used by designers in other countries as well, solidifying its worldwide design reputation. There are many subtle differences in DIN Nexts letters when compared withe DIN 1451 original. These were added by Kobayashi to make the new family even more versatile in 21st-century media. For instance, although DIN 1451s corners are all pointed angles, DIN Next has rounded them all slightly. Even this softening is a nod to part of DIN 1451s past, however. Many of the signs that use DIN 1451 are cut with routers, which cannot make perfect corners; their rounded heads cut rounded corners best. Linotypes DIN 1451 Engschrift and Mittelschrift are certified by the German DIN Institute for use on official signage projects. Since DIN Next is a new design, these applications within Germany are not possible with it. However, DIN Next may be used for any other project, and it may be used for industrial signage in any other country! DIN Next has been tailored especially for graphic designers, but its industrial heritage makes it surprisingly functional in just about any application.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this font software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This font software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this font software is limited to your workstation for your own use. You may not copy or distribute this font software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informations concernant le contrat d'utilisation du logiciel de polices, veuillez consulter notre site web www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418