LolitaW04-Heavy

Regular

1.00

Miguel Hernandez

Lolita Heavy is a trademark of Miguel Hernandez.

Copyright (c) 2012 by Miguel Hernandez. All rights reserved.

Copyright (c) 2012 by Miguel Hernandez. All rights reserved.

LakesightW01-Regular

Regular

1.00

Mans Greback

Mans Greback

Lakesight is a trademark of Mans Greback.

Copyright (c) 2014 by Mans Greback. All rights reserved.

http://www.aringtypeface.com

Please visit www.aringtypeface.com to get a commercial license.

DF Moderns

Regular

1.00

International Typeface Corporation

David Sagorski

Moderns is a trademark of International Typeface Corporation and may be registered in certain jurisdictions.

Copyright 1997 International Typeface Corporation. All rights reserved.

Please review the description of this font at http://www.itcfonts.com.

NOTIFICATION OF LICENSE AGREEMENT This typeface is the property of International Typeface Corporation (ITC) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from ITC or together with software distributed by one of the licencees of ITC. This software is a valuable asset of ITC. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software or contact ITC for a copy of the license agreement. General information:www.itcfonts.comFor license terms and usage rights, please visit our web site at:www.itcfonts.com/license

MagallanesW03-Lt

Regular

1.00

Daniel Hernandez

Daniel Hernndez

Magallanes Light is a trademark of Daniel Hernandez.

Copyright (c) 2012 by Daniel Hernandez. All rights reserved.

Copyright (c) 2012 by Daniel Hernandez. All rights reserved.

ITCDyadisW01-MdSC

Regular

1.00

International Typeface Corporation

Yvonne Diedrich

ITC is a trademark of International Typeface Corporation Registered in the U.S. Patent and Trademark Office and may be registered in certain jurisdictions;Dyadis is a trademark of International Typeface Corporation and may be registered in

Copyright 1998 International Typeface Corporation. All rights reserved.

Please review the description of this font at http://www.itcfonts.com.

NOTIFICATION OF LICENSE AGREEMENT This typeface is the property of Agfa Monotype Corporation (AMT) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from AMT or together with software distributed by one of the licencees of AMT. This software is a valuable asset of AMT. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software or contact AMT for a copy of the license agreement. General information:www.fonts.comFor license terms and usage rights, please visit our web site at:www.agfamonotype.com/html/type/license.htmlLizenzbedingungen und Nutzungsrechte finden Sie auf unserer Webseite:www.agfamonotype.com/html/type/license.htmlPour plus d'informations concernant les droits d'utilisation et les questions contractuelles, veuillez consultez notre site:www.agfamonotype.com/html/type/license.htmlPara obtener informacin acerca de los trminos de licencia y los derechos de uso, visite nuestro sitio en el Web en:www.agfamonotype.com/html/type/license.htmlPer le condizioni contrattuali ed i diritti d'uso, visitate il nostro sito web all'indirizzo:www.agfamonotype.com/html/type/license.html

EurocratW01-Light

Regular

1.00

Adrian Williams.

Adrian Williams

Eurocrat is a registered trade mark of Adrian Williams, UK.

Copyright Adrian Williams 2009, 2010 (formerly copyright Adrian Williams Design Ltd 1987, 2003, 2007). All rights reserved. Eurocrat is a registered trade mark of Adrian Williams. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright Adrian Williams 2009, 2010 (formerly copyright Adrian Williams Design Ltd 1987, 2003, 2007). Eurocrat is a registered trade mark of Adrian Williams. All rights reserved.

End User License Agreement Adrian Williams, owner of the range of fonts known as 'Club Type', grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Product). Adrian Williams or any other organisation which it appoints to distribute Products under the terms of this agreement shall be hereafter referred to as Distributor. DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.Refund policy for purchased ProductsEnd User can request a refund within 90 days of the purchase by sending a written request to the business address shown at Distributor's website. Please include the transaction information and explain why End User is requesting a refund. When the Distributor initiates a refund, it will communicate with the End User to give the Distributor the opportunity to resolve the reason for refund request. If the refund issue cannot be resolved within 30 days, a refund may be credited to the End User.RegistrationDistributor must be informed of any purchases or other receipts of Products by the End User, sometimes known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use In consideration of payment of the basic purchase price of Product, Product is licensed for use on up to 5 (five) computing devices including Central Processing Units, Networked Terminals or File Server (hereafter referred to as CPUs) at the same site. For the avoidance of doubt Products installed for network use on a single File Server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Additional Licence End User, on receipt of paid invoice or receipt of purchase, acquires limited additional Licence to use purchased Product on multiple CPUs at the site stated and for the total number of CPUs purchased and shown on receipt of purchase or paid invoice solely for its own customary business or personal use. If agreement has been made in writing to evaluate the Product for fitness of purpose, Product must be erased from End User CPUs within the evalaution period of 7 days from the date of purchase.To ensure only original created media is distributed which can be supported by the Distributor, Products may only be distributed to Service Bureaux, Designers, Typesetters, Printers etc., or other external organisation who are third parties to this agreement, provided that; a) if End User requires delivery media support from Distributor the original delivery media is not an unauthorised copy for distribution from those originally distributed by Distributor and that any extra copies of the delivery media required for distribution are purchased from Disributor. b) if End User does not require Disributor to provide delivery media support, End User may freely copy and distribute the delivery media ONLY under the terms of the EULA and this Additional Licence.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way or;b) electronic documents are for personal and or internal business use only;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.End User may embed Products into electronic documents on licensed CPUs provided that;a) electronic documents are for personal use or;b) internal business use and will not be further distributed.Rights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation of Products in accordance with this Agreement and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyEnd User and Distributor acknowledges that Products are the intellectual property of Adrian Williams together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. End User may not modify, or cause to be modified, the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.End UserEnd User agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsEnd User acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesDistributor's cumulative liabilities for any loss or damage to End User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00 (thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Distributor and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Distributor at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Distributor not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of 60 (sixty) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Distributor will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Distributor will not warrant the performance of Products or documentation. If End User fails to prove the Product was obtained from an authorized source, the Distributor shall have no responsibility to correct any faults. The foregoing states the sole extent of Distributor's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Distributor be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Distributor and agrees to be bound by its terms. This agreement inures to the benefit of Distributor and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Distributor and may not be amended except by written consent from Adrian Williams. This agreement will be governed by the laws of the United Kingdom. Contacting UsWebsite: http://www.clubtype.co.ukAuthorised Distributors list is available from the Club Type website www.clubtype.co.uk Copyright Adrian Williams 2009.eula2009.1

KallosITCW01-Medium

Regular

1.01

International Typeface Corporation

ITC Kallos is a trademark of International Typeface Corporation Registered in U.S. Patent & Trademark Office and may be registered in certain other jurisdictions.

Copyright 1996, 2008 International Typeface Corporation. All rights reserved.

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of International Typeface Corporation (ITC) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from ITC or together with software distributed by one of the licencees of ITC.This software is a valuable asset of ITC. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software.If you have any questions concerning your rights you should review the license agreement you received with the software or contact ITC for a copy of the license agreement.General information:www.itcfonts.comFor license terms and usage rights, please visit our web site at:www.itcfonts.com/license

CommonComicW00-Bold

Regular

1.00

Canada Type

Patrick Griffin

Common Comic is a trade mark of Canada Type.

Copyright 2013 Canada Type. All rights reserved.

Copyright 2013 Canada Type. Common Comic is a trade mark of Canada Type. All rights reserved.

SEGA LOGO FONT

Regular

001.000

(R) & (C)SEGA ENTERPRISES, LIMITED

This font is a registred trademark of SEGA (SErvice GAmes)

MaxwellSlabW01-Light

Regular

1.00

Kimmy Design

Kimmy Kirkwood

Maxwell Slab DemiBold is a trademark of Kimmy Design.

Copyright (c) 2013 by Kimmy Design. All rights reserved.

END USER LICENSE AGREEMENT This copy of Maxwell (Font Family) (the Software Product) and accompanying documentation is licensed and not sold. This Software Product is protected by copyright laws and treaties, as well as laws and treaties related to other forms of intellectual property. Kimmy Design or its subsidiaries, affiliates, and suppliers (collectively KD) own intellectual property rights in the Software Product. The Licensee's (you or your) license to download, use, copy, or change the Software Product is subject to these rights and to all the terms and conditions of this End User License Agreement (Agreement). Acceptance YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT BY SELECTING THE ACCEPT OPTION AND DOWNLOADING THE SOFTWARE PRODUCT OR BY INSTALLING, USING, OR COPYING THE SOFTWARE PRODUCT. YOU MUST AGREE TO ALL OF THE TERMS OF THIS AGREEMENT BEFORE YOU WILL BE ALLOWED TO DOWNLOAD THE SOFTWARE PRODUCT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU MUST SELECT DECLINE AND YOU MUST NOT INSTALL, USE, OR COPY THE SOFTWARE PRODUCT. License Grant This Agreement entitles you to install and use one copy of the Software Product. In addition, you may make one archival copy of the Software Product. The archival copy must be on a storage medium other than a hard drive, and may only be used for the reinstallation of the Software Product. This Agreement does not permit the installation or use of multiple copies of the Software Product, or the installation of the Software Product on more than one computer at any given time, on a system that allows shared used of applications, on a multi-user network, or on any configuration or system of computers that allows multiple users. Multiple copy use or installation is only allowed if you obtain an appropriate licensing agreement for each user and each copy of the Software Product. Restrictions on Transfer Without first obtaining the express written consent of KD, you may not assign your rights and obligations under this Agreement, or redistribute, encumber, sell, rent, lease, sublicense, or otherwise transfer your rights to the Software Product. Restrictions on Use You may not use, copy, or install the Software Product on any system with more than one computer, or permit the use, copying, or installation of the Software Product by more than one user or on more than one computer. If you hold multiple, validly licensed copies, you may not use, copy, or install the Software Product on any system with more than the number of computers permitted by license, or permit the use, copying, or installation by more users, or on more computers than the number permitted by license. You may not decompile, reverse-engineer, disassemble, or otherwise attempt to derive the source code for the Software Product. You may not use the database portion of the Software Product in connection with any software other than the Software Product. Restrictions on Alteration You may not modify the Software Product or create any derivative work of the Software Product or its accompanying documentation. Derivative works include but are not limited to translations. You may not alter any files or libraries in any portion of the Software Product. You may not reproduce the database portion or create any tables or reports relating to the database portion. Restrictions on Copying You may not copy any part of the Software Product except to the extent that licensed use inherently demands the creation of a temporary copy stored in computer memory and not permanently affixed on storage medium. You may make one archival copy which must be stored on a medium other than a computer hard drive. Limited Software Product Warranty For a period of 10 days days from the date of shipment or from the date that you download the Software Product, as applicable, KD warrants that when properly installed and used under normal conditions, the Software Product will perform substantially as advertised. Disclaimer of Warranties and Limitation of Liability UNLESS OTHERWISE EXPLICITLY AGREED TO IN WRITING BY KD, KD MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, IN FACT OR IN LAW, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OTHER THAN AS SET FORTH IN THIS AGREEMENT OR IN THE LIMITED WARRANTY DOCUMENTS PROVIDED WITH THE SOFTWARE PRODUCT. KD makes no warranty that the Software Product will meet your requirements or operate under your specific conditions of use. KD makes no warranty that operation of the Software Product will be secure, error free, or free from interruption. YOU MUST DETERMINE WHETHER THE SOFTWARE PRODUCT SUFFICIENTLY MEETS YOUR REQUIREMENTS FOR SECURITY AND UNINTERRUPTABILITY. YOU BEAR SOLE RESPONSIBILITY AND ALL LIABILITY FOR ANY LOSS INCURRED DUE TO FAILURE OF THE SOFTWARE PRODUCT TO MEET YOUR REQUIREMENTS. KD WILL NOT, UNDER ANY CIRCUMSTANCES, BE RESPONSIBLE OR LIABLE FOR THE LOSS OF DATA ON ANY COMPUTER OR INFORMATION STORAGE DEVICE. UNDER NO CIRCUMSTANCES SHALL KD, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU OR ANY OTHER PARTY FOR INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL, PUNITIVE, OR EXEMPLARY DAMAGES OF ANY KIND (INCLUDING LOST REVENUES OR PROFITS OR LOSS OF BUSINESS) RESULTING FROM THIS AGREEMENT, OR FROM THE FURNISHING, PERFORMANCE, INSTALLATION, OR USE OF THE SOFTWARE PRODUCT, WHETHER DUE TO A BREACH OF CONTRACT, BREACH OF WARRANTY, OR THE NEGLIGENCE OF KD OR ANY OTHER PARTY, EVEN IF KD IS ADVISED BEFOREHAND OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT THAT THE APPLICABLE JURISDICTION LIMITS KD'S ABILITY TO DISCLAIM ANY IMPLIED WARRANTIES, THIS DISCLAIMER SHALL BE EFFECTIVE TO THE MAXIMUM EXTENT PERMITTED. Limitation of Remedies and Damages Your remedy for a breach of this Agreement or of any warranty included in this Agreement is the correction or replacement of the Software Product. Selection of whether to correct or replace shall be solely at the discretion of KD. KD reserves the right to substitute a functionally equivalent copy of the Software Product as a replacement. If KD is unable to provide a replacement or substitute Software Product or corrections to the Software Product, your sole alternate remedy shall be a refund of the purchase price for the Software Product exclusive of any costs for shipping and handling. Any claim must be made within the applicable warranty period. All warranties cover only defects arising under normal use and do not include malfunctions or failure resulting from misuse, abuse, neglect, alteration, problems with electrical power, acts of nature, unusual temperatures or humidity, improper installation, or damage determined by KD to have been caused by you. All limited warranties on the Software Product are granted only to you and are non-transferable. You agree to indemnify and hold KD harmless from all claims, judgments, liabilities, expenses, or costs arising from your breach of this Agreement and/or acts or omissions. Governing Law, Jurisdiction and Costs This Agreement is governed by the laws of California, without regard to California's conflict or choice of law provisions. Severability If any provision of this Agreement shall be held to be invalid or unenforceable, the remainder of this Agreement shall remain in full force and effect. To the extent any express or implied restrictions are not permitted by applicable laws, these express or implied restrictions shall remain in force and effect to the maximum extent permitted by such applicable laws.

CantigaCndW01-Bold

Regular

1.00

Isac Corra Rodrigues

Isac Corra Rodrigues

Cantiga Condensed is a trademark of Isac Corra Rodrigues.

Copyright (c) 2014 by Isac Corra Rodrigues. All rights reserved.

Copyright (c) 2014 by Isac Corra Rodrigues. All rights reserved.

Brassiere Seethru

Regular

1.0

Graham Meade

2001, Graham Meade & Apostrophic Lab. All rights reserved. info@apostrophiclab.com, www.apostrophiclab.com

2001, Graham Meade & Apostrophic Lab. All rights reserved. info@apostrophiclab.com, www.apostrophiclab.com

BurlingtonW01

Regular

1.1

Linotype GmbH

Alan Meeks

Burlington is a trademark of International Typeface Corporation.

Part of this font software is copyrighted 2006 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH. Copyright Esselte Letraset Ltd., 1990.

Burlington was designed by Alan Meeks in 1985 and is a decorative typeface in the neoclassical style of the middle of the 19th century. Characteristic of faces from this time is the low x-height, which makes the font look as though it is reaching upward. This combined with the white areas in the strokes give Burlington a light, airy feel. The elegant Burlington is particularly good for headlines and can also be used for short texts in point sizes of 12 or larger.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this font software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This font software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this font software is limited to your workstation for your own use. You may not copy or distribute this font software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informations concernant le contrat d'utilisation du logiciel de polices, veuillez consulter notre site web www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418

SF DecoTechno Condensed

Regular

1.1

ShyFoundry

Derek Vogelpohl

SF DecoTechno Condensed is a trademark of ShyFoundry.

Copyright (c) 2008 by ShyFoundry. All rights reserved. Freeware for personal use only. To purchase a commercial license, please visit our site at http://www.shyfoundry.com.

For additional information about the usage of this font, please read the included ShyFoundry Freeware EULA or visit our site at http://www.shyfoundry.com/licensing.

For additional information about the usage of this font, please read the included ShyFoundry Freeware EULA or visit our site at http://www.shyfoundry.com/licensing.

BerytusW23-SemiBold

Regular

1.10

Nadine Chahine

Nadine Chahine

Berytus is a trademark of Nadine Chahine.

Copyright (c) Nadine Chahine, 2007. All rights reserved.

www.arabictype.com

Nadine Chahine END-USER LICENSE AGREEMENT_Nadine Chahine is the type designer and developer of Berytus.Nadine Chahine Font License AgreementPlease read this agreement carefully! By installing the font, you are agreeing to the terms of this license. The fonts and artwork are licensed for 5 stations. If your configuration exceeds this format, you must contact the type designer Nadine Chahine [nadine@arabictype.com] or a licensed distributor to expand your site license.The font may not be copied or duplicated in any form except for backup purposes. The font or documentation may not be rented, leased, sub-licensed or lent to another person or entity.The font may not be returned or exchanged unless defective. Defective font shall be replaced by the same font if accompanied with a purchase receipt and the seller is notified within one week of purchase.The font software may not be renamed, modified, sold, or re-distributed in any mode or way. If you wish to modify the font software, you need express written permission from the designer Nadine Chahine [nadine@arabictype.com].This license does not permit any form of embedding or encrypting of the font in digital documents or any other form. If embedding of the fonts is desired, the user must purchase an additional license from Nadine Chahine or a licensed distributor based upon usage. If an embedding license is desired, licensee must represent and warrant that licensee's encryption of the embedded font is secure enough to prevent access or use by anyone using the software in which the font data is embedded.The user of this font agrees to credit Nadine Chahine as the trademark and copyright owner of the Berytus fonts and list the font names, wherever and whenever design, production, or any other credits are shown.Any violation by licensee of this agreement shall cause this license to be terminated. In the event of termination, and without limiting any other remedies which may be available against the licensee, the licensee must immediately return the font to Nadine Chahine or a licensed distributor and certify that no copies remain in your possession or exist on the originally licensed site.Nadine Chahine make no warranties expressed or implied as to merchantability, fitness for a particular purpose, or otherwise. Without limiting the aforementioned, the type designer shall in no event be liable for any direct, indirect, consequential, or incidental damages, including damages from loss of business profits, business interruption, and loss of business information, arising out of the use or inability to use the product.

RomanticJetsW00-Regular

Regular

1.00

Ray Larabie

Ray Larabie

Romantic Jets is a trademark of Typodermic Fonts

(c) 2011 Typodermic Fonts. See attached license agreement. If agreement is missing visit typodermicfonts.com for more info.

http://www.typodermicfonts.com

Please read the current Typodermic Fonts license agreement at http://typodermicfonts.com/pages/license

Reclame

Regular

1.000

Peter Wiegel

Peter Wiegel

Reclame is a trademark of Peter Wiegel.

Copyright (c) 2014 by Peter Wiegel. Open Font under Terms of following Free Software Licenses:GPL (General Public License) with font-exception and OFL (Open Font License

Copyright (c) 2012 by Peter Wiegel. Open Font under Terms of following Free Software Licenses:GPL (General Public License) with font-exception and OFL (Open Font License

GPL- General Public License AND OFL-Open Font License

FranklinITCW01-Thin

Regular

1.01

International Typeface Corporation

ITC is a trademark of International Typeface Corporation Registered in U.S. Patent and Trademark Office and may be registered in certain other jurisdictions; Franklin is a trademark of International Typeface Corporation and may be registere

Copyright 2007 International Typeface Corporation. All rights reserved. ITC Franklin is designed by David Berlow, The Font Bureau, Inc.

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of International Typeface Corporation (ITC) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from ITC or together with software distributed by one of the licencees of ITC.This software is a valuable asset of ITC. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software.If you have any questions concerning your rights you should review the license agreement you received with the software or contact ITC for a copy of the license agreement.General information:www.itcfonts.comFor license terms and usage rights, please visit our web site at:www.itcfonts.com/license

Rough Cut

Regular

1.00 May 28, 2013, initial release

Typeface (your company). 2013. All Rights Reserved

This font was created using FontCreator 6.0 from High-Logic.com

AspiraNarW01-ThinItalic

Regular

1.5

Durotype

Ben Blom

Aspira is a trademark of Durotype.

Copyright 2012-2014 Durotype, www.durotype.com. All rights reserved.

This font is the property of Durotype, and its use by you is covered under the terms of a license agreement. This font may not be given away, sold, rented or loaned to others in any way. For full information, see the license agreement you received with this font. www.durotype.com

BasicCommercialSRW01-Roman

Regular

1.02

Linotype GmbH

Linotype Design Studio

Basic Commercial is a trademark of Linotype GmbH and may be registered in certain jurisdictions.

Copyright 2009 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH. Basic Commercial is a trademark of Linotype GmbH and may be registered in certain jurisdictions. This typeface is original artwork of Linotype Design Studio. The design may be protected in certain jurisdictions.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this font software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This font software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this font software is limited to your workstation for your own use. You may not copy or distribute this font software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informations concernant le contrat d'utilisation du logiciel de polices, veuillez consulter notre site web www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418

MeltingRecords

Regular

1.00 September 11, 2015, initial release

Xerographer Fonts

Max Infeld Xerographer Fonts

MeltingRecords Xerographer Fonts. 2015. All Rights Reserved

Made by Xerographer Fonts in Chico,California

mailto:maxinfeld@gmail.com

GoudyTextLombCapW01-Regular

Regular

1.00

Linotype GmbH

Goudy Text MT is a trademark of The Monotype Corporation, Inc. which may be registered in certain jurisdictions.

Digitized data copyright 1998 The Monotype Corporation, Inc. All rights reserved.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this font software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This font software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this font software is limited to your workstation for your own use. You may not copy or distribute this font software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informations concernant le contrat d'utilisation du logiciel de polices, veuillez consulter notre site web www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418

KGALittleSwagW00-Regular

Regular

1.00

Kimberly Geswein

Kimberly Geswein

Kg A LiTtLe SwAg is a trademark of Kimberly Geswein.

Copyright (c) 2013 by Kimberly Geswein. All rights reserved.

http://kimberlygeswein.com

http://kimberlygeswein.com

Kingsbridge

SemiCondensed Book

1.000

Ray Larabie

Ray Larabie

Kingsbridge is trademark of Typodermic Fonts Inc.

(c) 2014 Typodermic Fonts Inc. See attached license agreement. If agreement is missing visit typodermicfonts.com for more info.

http://typodermicfonts.com/pages/license

Romanicum

Regular

1.0

Jambo!

Jambo!

Romanicum is a trademark of Jambo!.

Copyright (c) 2014 by Jambo!. All rights reserved.

The license for this font is free for personal use. License url: http://www.jambofontsdesign.com/licenza/ TO DOWNLOAD THE FONT IN ITS FULL VERSION: http://www.jambofontsdesign.com/fonts-caratteri/serif/romanicum/To get a license for commercial use (free of charge) and visit www.jambofontsdesign.com contact the webmaster. The distribution of this font is permitted provided that the author is entitled with link to his website: www.jambofontsdesign.com thanks

The license for this font is free for personal use. License url: http://www.jambofontsdesign.com/licenza/ TO DOWNLOAD THE FONT IN ITS FULL VERSION: http://www.jambofontsdesign.com/fonts-caratteri/serif/romanicum/To get a license for commercial use (free of charge) and visit www.jambofontsdesign.com contact the webmaster. The distribution of this font is permitted provided that the author is entitled with link to his website: www.jambofontsdesign.com thanks

Gravity

Light

1

Vincenzo Vuono

Vincenzo Vuono

Gravity Light is a trademark of Vincenzo Vuono.

Copyright (c) 2011 by Vincenzo Vuono. All rights reserved.

Copyright (c) 2011 by Vincenzo Vuono. All rights reserved.

OhioW01-Bold

Regular

1.00

Gert Wiescher, Wiescher-Design, Munich, Germany, www.wiescher-design.de,

Gert Wiescher

Ohio is a trademark of Gert Wiescher, Wiescher-Design, Munich, Germany, www.wiescher-design.de,.

Copyright (c) 2012 by Gert Wiescher, Wiescher-Design, Munich, Germany, www.wiescher-design.de,. All rights reserved.

Wiescher Design Standard LicenseBy selecting the Accept License Agreement button, you are agreeing to be bound by the terms of this Agreement. This Agreement, in conjunction with the receipt that accompanies each purchase from Wiescher-Design, constitutes the complete agreement between you and Wiescher-Design.1. Allowed usesYou may use the licensed fonts to create images on any surface such as computer screens, paper, web pages, photographs, movie credits, printed material, T-shirts, and other surfaces where the image is a fixed size.You may use the licensed fonts to create EPS files or other scalable drawings provided that such files are only used by the household or company licensing the font.2. Number of usersThe maximum number of simultaneous users is specified in the applicable receipt. All users must belong to the same company or household purchasing the font.3. Third partiesYou may provide the font to a graphic designer, printer or other service bureau that is working on your behalf only if they agree to use the font exclusively for your work, agree to the terms of this license, and retain no copies of the font on completion of the work.You may not provide the font or make it accessible to any other third parties.4. EmbeddingYou may embed the licensed fonts into any document you send to third parties provided such embedding is restricted to viewing and printing that document.You may not embed the licensed fonts into software or hardware products in which the fonts will be used by the purchasers of such products. Such use requires a different license (OEM). Please contact g@wiescher-design.de for information on OEM licenses.5. ModificationsYou may import characters from the font as graphical objects into a drawing program and modify such graphical objects.You may not modify, adapt, translate, reverse engineer, decompile, disassemble, or create derivative works based on the licensed font itself without Wiescher-Designs' prior written consent.6. CopyrightThe font and the accompanying materials are copyrighted and contain proprietary information and trade secrets belonging to Wiescher-Design. Unauthorized copying of the Product even if modified, merged, or included with other software, or of the written materials, is expressly forbidden. You may be held legally responsible for any infringement of Wiescher-Designs intellectual property rights that is caused or encouraged by your failure to abide by the terms of this Agreement.7. TerminationThis Agreement is effective until terminated. This Agreement will terminate automatically without notice from Wiescher-Design if you fail to comply with any provision contained herein. Upon termination, you must destroy the written materials, the Product, and all copies of them, in part and in whole, including modified copies, if any.8. Product UpgradesWiescher-Design may, from time to time, update the Product. Product upgrade pricing may apply.9. Disclaimer and Limited WarrantyWiescher-Design warrants the Product to be free from defects in materials and workmanship under normal use for a period of twenty one (21) days from the date of delivery as shown on your receipt. Wiescher-Design' entire liability and your exclusive remedy as to a defective product shall be, at Wiescher-Designs' option, either return of purchase price or replacement of any such product that is returned to Wiescher-Design with a copy of the invoice. Wiescher-Design shall have no responsibility to replace the product or refund the purchase price if failure results from accident, abuse or misapplication, or if any product is lost or damaged due to theft, fire, or negligence. Any replacement product will be warranted for twenty one (21) days. This warranty gives you specific legal rights. You may have other rights, which vary from state to state.EXCEPT AS EXPRESSLY PROVIDED ABOVE, THE PRODUCT, IS PROVIDED AS IS. Wiescher-Design DOES NOT MAKE ANY WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.The entire risk as to the quality and performance of the Product rests upon you. Wiescher-Design does not warrant that the functions contained in the Product will meet your requirements or that the operation of the software will be uninterrupted or error free.Wiescher-Design SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FROM LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCT EVEN IF Wiescher-Design HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.10. Governing LawThis agreement is governed by the laws of the Federal Republic of Germany.

Intramural JL

Regular

1.00

Jeff's Fonts & Dingbats

Jeffrey N. Levine

Trademark of Jeff Levine & Ray Larabie

(C) 2001 by Jeff Levine & Ray Larabie. Freeware, not for sale.

A transformed version of a Ray Larabie font into a totally new typeface.My thanks to Ray for the permission to carry out typographic experimentation.

Freeware for commercial or non-commercial use. Resale or distribution in any form of media is strictly prohibited.

OriginsW00

Regular

1.00

Laura Worthington

Laura Worthington

Origins is a trademark of Laura Worthington.

Copyright (c) 2010 by Laura Worthington. All rights reserved.

Copyright (c) 2010 by . All rights reserved.