TipW01-ThinItalic

Regular

1.00

Suomi Type Foundry

Tomi Haaparanta

Tip-ThinItalic is a trademark of Suomi Type Foundry.

Copyright (c) 2014 by Suomi Type Foundry. All rights reserved.

Copyright (c) 2014 by Suomi Type Foundry. All rights reserved.

CongressSansW01-CondBold

Regular

1.00

Adrian Williams Design Ltd.

Adrian Wiliams

Congress is a registered trade mark of Adrian Williams Design Ltd, UK.

Copyright Adrian Williams Design Ltd 1985. Modified 2005, 2007. All rights reserved. Congress is a registered trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1985, with modifications 2005, 2007 Adrian Williams Design Ltd. Congress is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

End User License Agreement Adrian Williams Design Ltd (hereafter referred to as Supplier) grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Products). DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.RegistrationEnd User or Distributor of the Products must inform Supplier of a purchase or other distribution of Products, also known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use Products is licensed for use on up to 5 (five) central processing units (computers hereafter referred to as CPUs) at the same site, unless an additional written license has also been given. Products installed for network use on a single file server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way;b) electronic documents are for personal and or business use;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.User may embed Products into electronic documents provided that;a) electronic documents are for personal useb) internal business use and will not be further distributedRights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyUser acknowledges the Product is the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. User may not modify the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.UsersUser agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsUser acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesSuppliers cumulative liabilities for any loss or damage to User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00(thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Supplier and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Supplier at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Supplier not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Supplier will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Supplier will not warrant the performance of Products or documentation. If User fails to prove the Product was obtained from an authorized source, the Supplier shall have no responsibility to correct any faults. The foregoing states the sole extent of Supplier's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Supplier be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Supplier and agrees to be bound by its terms. This agreement inures to the benefit of Supplier and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Supplier and may not be amended except by written consent from Supplier. This agreement will be governed by the laws of the United Kingdom. Copyright Adrian Williams Design Limited trading as Club Type 1995-2005.Contacting UsAdrian Williams Design Ltd, also trades as Club Type, operating from:Buckland House, Grovehill Road, Redhill, Surrey RH1 6TW, United Kingdom. Tel: 01737 789772 eFax: 0870 0515681International tel (UK)+44 1737 789772International eFax: (UK)+44 870 0515681Email: adrian@clubtype.co.ukWebsite: http://www.clubtype.co.ukProducts received outside the United Kingdom may have been distributed to Users by an authorized Distributor. A list of Distributors is available from the Club Type website.February 2005

P22SpeysideW01SC-SmbdItSC

Regular

1.00

Torleiv Georg Sverdrup

Torleiv Georg Sverdrup

P22 Speyside Smbd SC Italic is a trademark of Torleiv Georg Sverdrup.

Copyright (c) 2010 by Torleiv Georg Sverdrup. All rights reserved.

Copyright (c) 2010 by Torleiv Georg Sverdrup. All rights reserved.

CCSpeedingBulletW00-Italic

Regular

1.00

Active Images

John Roshell

CCSpeedingBullet Italic is a trademark of Active Images.

Copyright (c) Active Images, 2006. All rights reserved.

Active Images Font License AgreementPlease read this license agreement carefully before youinstall your fonts. By installing fonts sent to you byACTIVE IMAGES, you accept this license agreement. If you donot accept the terms and conditions of this license, do notinstall the fonts in question.1. LICENSE Active Images is the exclusive owner of theelectronically transferred computer lettering fonts. Wegrant you, and you accept, a non-exclusive license to usethe electronically transferred fonts, but you are not theowner of them. Your right to use the fonts under thislicense agreement is called the license. By fonts, we referto the electronically transferred fonts and any embodimentor use that you make of the fonts in any form.2. AUTHORIZED USER AND USE You alone, as the purchaser ofthe fonts, are authorised to use the fonts under the licensefor personal, business or distributed projects. With fewexceptions: fonts are licensed for use on 5 CPUs and/or 1output device. Additional licenses are available on a ratioof 5 CPUs to 1 output device. Call us if you are not clearon whether you require additional licenses. Any otherduplication or use by any other person or entity constitutessoftware piracy, a criminal offense.3. LIMITED WARRANTY Active Images makes no warranties,express or implied, regarding the electronically transferredcomputer software, its merchantability or its fitness forany particular purpose.Active Images warrants the magnetic media to be free fromphysical defects for 90 days, after purchase. Active Imageswill replace the disk free of charge should it fail withinthis time. These fonts are sold for use only on the computerplatform indicated on the packaging. Use of these fonts onany platform other than that for which it was originallyintended is not recommended and invalidates any warranty.Active Images reserves the right to terminate this Licenseat any time and void your license if you fail to comply withthe terms and conditions of this License.If you have any questions about the License Agreement, ourreturn policy, security and on-line ordering, or anythingelse, please feel free to contact us atorders@comicbookfonts.com, or at the telephone number below.ACTIVE IMAGES8910 Rayford DriveLos Angeles, CA 90045Tel: 310 215-0362Fax: 775 890-5787www.activeimages.com

IM FELL DW Pica SC

Regular

3.00

Igino Marini

Igino Marini

2007 Igino Marini (www.iginomarini.com) With Reserved Font Name IM FELL DW Pica SC

Fell Types - De Walpergen Pica size - Roman . Typeface from the types bequeathed in 1686 to the University of Oxford by John Fell. Originally cut by Peter De Walpergen. Acquisition in 1692 (after the bequest). To be printed at 12.5 points to match the original size. Autospaced and autokerned using iKern developed by Igino Marini.

This Font Software is licensed under the SIL Open Font License, Version 1.1.

Kokila

Regular

5.91

Copyright (c) 2001, Modular Infotech, Pune, INDIA. - Licenced to Microsoft

This font is primarily meant for use in displaying Hindi text in documents. It is an OpenType font, based on Unicode.

You may use this font as permitted by the EULA for the product in which this font is included to display and print content. You may only (i) embed this font in content as permitted by the embedding restrictions included in this font; and (ii) temporarily download this font to a printer or other output device to help print content.

5TH AVENUE STENCIL

Regular

1.00 December 10, 2014, initial release

Woodcutter.es

Typeface WOODCUTTER MMXIV All Rights Reserved

This font was created using FontCreator 6.0 from High-Logic.com

Krugovis

Regular

1.000

Almeida Bruno

Bruno de Almeida

Almeida Bruno

be.net/almeidabruno

Free for personal use