Daniel Lanz Fonts Downloads

post
reset
  • Diverda Serif W04 Black Italic
    Diverda Serif W04 Black Italic
    Packages

    Diverda Serif

    Style

    Black Italic

    Version

    2.00

    Company

    Monotype GmbH

    Author

    Daniel Lanz

    Trademark

    Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

    Copyright

    Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

    Description

    Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

    License

    This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

  • Diverda Serif W04 Black
    Diverda Serif W04 Black
    Packages

    Diverda Serif

    Style

    Black

    Version

    2.00

    Company

    Monotype GmbH

    Author

    Daniel Lanz

    Trademark

    Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

    Copyright

    Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

    Description

    Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

    License

    This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

    Black Daniel Lanz
    93.7 KB
  • Diverda Serif W04 Bold Italic
    Diverda Serif W04 Bold Italic
    Packages

    Diverda Serif

    Style

    Bold Italic

    Version

    2.00

    Company

    Monotype GmbH

    Author

    Daniel Lanz

    Trademark

    Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

    Copyright

    Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

    Description

    Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

    License

    This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

  • Diverda Serif W04 Bold
    Diverda Serif W04 Bold
    Packages

    Diverda Serif

    Style

    Bold

    Version

    2.00

    Company

    Monotype GmbH

    Author

    Daniel Lanz

    Trademark

    Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

    Copyright

    Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

    Description

    Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

    License

    This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

    Bold Daniel Lanz
    92.79 KB
  • Diverda Serif W04 Medium It
    Diverda Serif W04 Medium It
    Packages

    Diverda Serif

    Style

    Medium Italic

    Version

    2.00

    Company

    Monotype GmbH

    Author

    Daniel Lanz

    Trademark

    Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

    Copyright

    Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

    Description

    Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

    License

    This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

  • Diverda Serif W04 Italic
    Diverda Serif W04 Italic
    Packages

    Diverda Serif

    Style

    Italic

    Version

    2.00

    Company

    Monotype GmbH

    Author

    Daniel Lanz

    Trademark

    Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

    Copyright

    Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

    Description

    Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

    License

    This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

    Italic Daniel Lanz
    59.85 KB
  • Diverda Serif W04 Medium
    Diverda Serif W04 Medium
    Packages

    Diverda Serif

    Style

    Medium

    Version

    2.00

    Company

    Monotype GmbH

    Author

    Daniel Lanz

    Trademark

    Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

    Copyright

    Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

    Description

    Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

    License

    This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

    Medium Daniel Lanz
    90.79 KB
  • Diverda Serif W04 Regular
    Diverda Serif W04 Regular
    Packages

    Diverda Serif

    Style

    Regular

    Version

    2.00

    Company

    Monotype GmbH

    Author

    Daniel Lanz

    Trademark

    Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

    Copyright

    Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

    Description

    Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

    License

    This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

    Regular Daniel Lanz
    91.37 KB
The latest addition icons More...
The latest addition fonts More...
  • Problem Secretary Normal Problem Secretary Normal
    Packages

    Problem Secretary Normal

    Style

    Problem Secretary No

    Copyright

    Copyright (c) Phillip Andrade, 1999. All rights reserved.

    Description

    This is shareware. For personal use please send 15 (US) to the address below. For use in a publication please write for more information. - Phillip Andrade - 5 Harold St - Sharon - MA - 02067 - neatoguy@earthlink.net

  • Foo-Regular Foo-Regular
    Style : Regular
    Packages

    Foo

    Style

    Regular

    Version

    5.003

    Company

    Ray Larabie

    Author

    Ray Larabie

    Trademark

    Foo is a trademark of Typodermic Fonts Inc.

    Copyright

    (c) 1996-2013 Typodermic Fonts Inc. See attached license agreement. If agreement is missing visit typodermicfonts.com for more info.

    Description

    http://typodermicfonts.com/pages/license

    License

    http://typodermicfonts.com/pages/license

  • King Richard Italic V2 King Richard Italic V2
    Style : Italic
    Packages

    King Richard

    Style

    Italic

    Version

    2.000 2004

    Company

    Ray Larabie

    Author

    Ray Larabie

    Copyright

    1999 Ray Larabie. This font is freeware. Read attached text file for details. Info & updates visit www.larabiefonts.com. Donations gratefully accepted at www.larabiefonts.com/donation.html. Also visit my commercial type foundry at www.typodermic.com. This font was updated in 2004.

    Description

    Larabie Fonts is able to offer unique free fonts through the generous support of visitors to the site. Making fonts is my full-time job and every donation, in any amount, enables me to continue running the site and creating new fonts. If you would like to support Larabie Fonts visit www.larabiefonts.com for details.

  • Savage Savage
    Style : Regular
    Packages

    Savage

    Style

    Regular

    Version

    1.00 July 30, 2006, initial release

    Copyright

    Typeface (your company). 2006. All Rights Reserved

    Description

    This font was created using FontCreator 5.5 from High-Logic.com

  • Congress Sans W01 Light Congress Sans W01 Light
    Style : Regular
    Packages

    CongressSansW01-Light

    Style

    Regular

    Version

    1.00

    Company

    Adrian Williams Design Ltd.

    Author

    Adrian Williams

    Trademark

    Congress is a trade mark of Adrian Williams Design Ltd, UK.

    Copyright

    Copyright Adrian Williams Design Ltd 1985. Modified 2005. All rights reserved. Congress is a registered trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

    Description

    This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1985, with modifications 2005 Adrian Williams Design Ltd. Congress is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

    License

    End User License Agreement Adrian Williams Design Ltd (hereafter referred to as Supplier) grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Products). DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.RegistrationEnd User or Distributor of the Products must inform Supplier of a purchase or other distribution of Products, also known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use Products is licensed for use on up to 5 (five) central processing units (computers hereafter referred to as CPUs) at the same site, unless an additional written license has also been given. Products installed for network use on a single file server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way;b) electronic documents are for personal and or business use;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.User may embed Products into electronic documents provided that;a) electronic documents are for personal useb) internal business use and will not be further distributedRights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyUser acknowledges the Product is the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. User may not modify the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.UsersUser agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsUser acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesSuppliers cumulative liabilities for any loss or damage to User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00(thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Supplier and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Supplier at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Supplier not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Supplier will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Supplier will not warrant the performance of Products or documentation. If User fails to prove the Product was obtained from an authorized source, the Supplier shall have no responsibility to correct any faults. The foregoing states the sole extent of Supplier's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Supplier be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Supplier and agrees to be bound by its terms. This agreement inures to the benefit of Supplier and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Supplier and may not be amended except by written consent from Supplier. This agreement will be governed by the laws of the United Kingdom. Copyright Adrian Williams Design Limited trading as Club Type 1995-2005.Contacting UsAdrian Williams Design Ltd, also trades as Club Type, operating from:Buckland House, Grovehill Road, Redhill, Surrey RH1 6TW, United Kingdom. Tel: 01737 789772 eFax: 0870 0515681International tel (UK)+44 1737 789772International eFax: (UK)+44 870 0515681Email: adrian@clubtype.co.ukWebsite: http://www.clubtype.co.ukProducts received outside the United Kingdom may have been distributed to Users by an authorized Distributor. A list of Distributors is available from the Club Type website.February 2005

  • Boucherie Catchwords W95 Rg Boucherie Catchwords W95 Rg
    Style : Regular
    Packages

    BoucherieCatchwordsW95-Rg

    Style

    Regular

    Version

    1.00

    Company

    Laura Worthington

    Author

    Laura Worthington

    Trademark

    Boucherie Catchwords is a trademark of Laura Worthington.

    Copyright

    Copyright (c) 2014 by Laura Worthington. All rights reserved.

    Description

    Copyright (c) 2014 by Laura Worthington. All rights reserved.

  • 32768 NO V1 32768 NO V1
    Style : Regular
    Packages

    32768 NO

    Style

    Regular

    Version

    1.00: 7.25.99 Revision 1

    Company

    [ Divide By Zero ]

    Author

    Tom Murphy 7

    Trademark

    32768 NO is Copyright (c) 1999 Tom Murphy 7 of [ Divide By Zero ]

    Copyright

    http://fonts.tom7.com / - 32760 NO Copyright (c) 1999 Tom Murphy 7 - Use for anything, and distribute freely... But don't sell (on CD, for instance!). ImightbeTM@aol.com - 339 Still Hill Rd - Hamden CT 06518.1830 - I never asked for the truth, but you li

    Description

    Created by Tom Murphy 7.32768 is my favorite nontrivial power of two. This is kind of like Eye Of The Needle stuff.[Divide By Zero] fonts:http://fonts.tom7.com/

    License

    Here is the summary of the license for this font, which may be overridden by (most likely very similar) new licenses at the URL below. If you want to do anything with this font you think I might not allow, please see the license URL at the bottom of this document and/or e-mail me.NO MONEY must ever exchange hands for this font file, without EXPLICIT WRITTEN PERMISSION from the designer.This means you MAY NOT SELL THIS FONT on a font-collection CD, nor singularly nor part of any other type package.You may distribute this font file to anyone you want, as long as you do not modify it and do not charge any money or services.You can use this font in noncommercial applications and websites freely and without the designer's permission.You can use this font to create commercial products or web sites, but when appropriate I'd love for you to send me a complimentary copy of the item you use it in.If you distribute or use this font, you may wish to link to the [ Divide By Zero ] web page (though this is not necessary):http://fonts.tom7.com/For the full license and updates:http://fonts.tom7.com/legal/Mailing address:Tom Murphy 7339 Still Hill RdHamden CT 06518.1830USA

  • HighMethod HighMethod
    Style : Regular
    Packages

    HighMethod

    Style

    Regular

    Version

    1.00 July 27, 2012, initial release

    Company

    Xerographer Fonts

    Author

    Max Infeld

    Copyright

    Typeface (your company). 2012. All Rights Reserved

    Description

    This font was created using FontCreator 6.0 from High-Logic.com

    License

    mailto:maxinfeld@gmail.com

  • WerkHaus W00 Italic WerkHaus W00 Italic
    Style : Regular
    Packages

    WerkHausW00-Italic

    Style

    Regular

    Version

    1.00

    Company

    Jonathan Hill

    Author

    Jonathan Hill

    Trademark

    WerkHaus Italic is a trademark of Jonathan Hill.

    Copyright

    Copyright (c) Jonathan Hill, 2009. All rights reserved.

    License

    By Installing any of The Northern Block fonts on your computer, you agree to the terms of use set forth by The Northern Block. Details can can be found at: http://www.thenorthernblock.co.uk/fonts_faq.htm. Use of this font software by unlicensed parties is expressly prohibited.