Dark Metal

Regular

1.00 November 29, 2012, initial release

Typeface (your company). 2012. All Rights Reserved

This font was created using FontCreator 5.6 from High-Logic.com

PerrywoodW01-LightCn

Regular

1.02

Monotype Imaging Inc.

Johannes Birkenbach

Perrywood is a trademark of The Monotype Corporation in the United States and/or other countries; MT is a trademark of Monotype Imaging, Inc. Registered in U.S. Patent and Trademark Office and may be registered in certain other jurisdiction

Font software Copyright 1993 Adobe Systems Incorporated. Typeface designs Copyright 1993 The Monotype Corporation. All rights reserved.

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of Monotype Imaging Inc. and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from Monotype Imaging or together with software distributed by one of the licencees of Monotype Imaging.This software is a valuable asset of Monotype Imaging. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software.If you have any questions concerning your rights you should review the license agreement you received with the software or contact Monotype Imaging for a copy of the license agreement.General information:www.fonts.comFor license terms and usage rights, please visit our web site at:www.monotypeimaging.com/html/type/license.htmlLizenzbedingungen und Nutzungsrechte finden Sie auf unserer Webseite:www.monotypeimaging.com/html/type/license.htmlPour plus d'informations concernant les droits d'utilisation et les questions contractuelles, veuillez consultez notre site:www.monotypeimaging.com/html/type/license.htmlPara obtener informacin acerca de los trminos de licencia y los derechos de uso, visite nuestro sitio en el Web en:www.monotypeimaging.com/html/type/license.htmlPer le condizioni contrattuali ed i diritti d'uso, visitate il nostro sito web all'indirizzo:www.monotypeimaging.com/html/type/license.html

EurocratW01-LightItalic

Regular

1.00

Adrian Williams.

Adrian Williams

Eurocrat is a registered trade mark of Adrian Williams, UK.

Copyright Adrian Williams 2009, 2010 (formerly copyright Adrian Williams Design Ltd 1987, 2003, 2007). All rights reserved. Eurocrat is a registered trade mark of Adrian Williams. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright Adrian Williams 2009, 2010 (formerly copyright Adrian Williams Design Ltd 1987, 2003, 2007). Eurocrat is a registered trade mark of Adrian Williams. All rights reserved.

End User License Agreement Adrian Williams, owner of the range of fonts known as 'Club Type', grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Product). Adrian Williams or any other organisation which it appoints to distribute Products under the terms of this agreement shall be hereafter referred to as Distributor. DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.Refund policy for purchased ProductsEnd User can request a refund within 90 days of the purchase by sending a written request to the business address shown at Distributor's website. Please include the transaction information and explain why End User is requesting a refund. When the Distributor initiates a refund, it will communicate with the End User to give the Distributor the opportunity to resolve the reason for refund request. If the refund issue cannot be resolved within 30 days, a refund may be credited to the End User.RegistrationDistributor must be informed of any purchases or other receipts of Products by the End User, sometimes known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use In consideration of payment of the basic purchase price of Product, Product is licensed for use on up to 5 (five) computing devices including Central Processing Units, Networked Terminals or File Server (hereafter referred to as CPUs) at the same site. For the avoidance of doubt Products installed for network use on a single File Server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Additional Licence End User, on receipt of paid invoice or receipt of purchase, acquires limited additional Licence to use purchased Product on multiple CPUs at the site stated and for the total number of CPUs purchased and shown on receipt of purchase or paid invoice solely for its own customary business or personal use. If agreement has been made in writing to evaluate the Product for fitness of purpose, Product must be erased from End User CPUs within the evalaution period of 7 days from the date of purchase.To ensure only original created media is distributed which can be supported by the Distributor, Products may only be distributed to Service Bureaux, Designers, Typesetters, Printers etc., or other external organisation who are third parties to this agreement, provided that; a) if End User requires delivery media support from Distributor the original delivery media is not an unauthorised copy for distribution from those originally distributed by Distributor and that any extra copies of the delivery media required for distribution are purchased from Disributor. b) if End User does not require Disributor to provide delivery media support, End User may freely copy and distribute the delivery media ONLY under the terms of the EULA and this Additional Licence.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way or;b) electronic documents are for personal and or internal business use only;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.End User may embed Products into electronic documents on licensed CPUs provided that;a) electronic documents are for personal use or;b) internal business use and will not be further distributed.Rights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation of Products in accordance with this Agreement and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyEnd User and Distributor acknowledges that Products are the intellectual property of Adrian Williams together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. End User may not modify, or cause to be modified, the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.End UserEnd User agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsEnd User acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesDistributor's cumulative liabilities for any loss or damage to End User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00 (thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Distributor and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Distributor at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Distributor not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of 60 (sixty) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Distributor will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Distributor will not warrant the performance of Products or documentation. If End User fails to prove the Product was obtained from an authorized source, the Distributor shall have no responsibility to correct any faults. The foregoing states the sole extent of Distributor's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Distributor be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Distributor and agrees to be bound by its terms. This agreement inures to the benefit of Distributor and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Distributor and may not be amended except by written consent from Adrian Williams. This agreement will be governed by the laws of the United Kingdom. Contacting UsWebsite: http://www.clubtype.co.ukAuthorised Distributors list is available from the Club Type website www.clubtype.co.uk Copyright Adrian Williams 2009.eula2009.1

Arial

Regular

2.0

DedMozz Co

DedMozz

Vse dela - trademark sobludaetsa

DedMozz specialno dla Julia

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of Monotype Typography and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from Monotype or together with software distributed by one of Monotype s licensees.This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to your workstation for your own publishing use. You may not copy or distribute this software.If you have any question concerning your rights you should review the license agreement you received with the software or contact Monotype for a copy of the license agreement.Monotype can be contacted at:USA 847-718-0400 UK 44(0)1737 765959For license terms and usage rights, please visit our web site at www.monotype.com/html/type/license.html Lizenzbedingungen und Nutzungsrechte finden Sie auf unserer Webseite www.monotype.com/html/type/license.htmlPour plus d'informations concernant les droits d'utilisation et les questions contractuelles, veuillez consultez notre site www.monotype.com/html/type/license.htmlPara obtener informacion acerca de los terminos de licencia y los derechos de uso, visite nuestro sitio en el Web en www.monotype.com/html/type/license.htmlPer le condizioni contrattuali ed i diritti d'uso, visitate il nostro sito web all'indirizzo www.monotype.com/html/type/license.html

ThaunW00-Wide

Regular

1.1

Anton Scholtz

Anton Scholtz

Thaun Wide125 is a trademark of Scholtz Fonts.

Copyright (c) 2013 by Scholtz Fonts. All rights reserved.

Copyright (c) 2013 by Scholtz Fonts. All rights reserved.

NovecentoSlabW01-NwUltBd

Regular

1.00

Jan Tonellato

Jan Tonellato

Copyright 2013 by Jan Tonellato. All rights reserved.

OVERVIEW:Novecento Slab is the slab serif companion of Novecento Sans, an uppercase + smallcaps font family inspired on european typographic tendencies between the second half of 19th century and first half of the 20th.As the excellent French typographer Xavier Dupr said it seems to have been cast in concrete. Despite its blocky look, Novecento Slabs lettershapes are optically corrected and balanced.This font face is designed to be used mostly for headlines, visual identities or short sentences, both in big and small sizes.Novecento Slab family was spaced and kerned with love and patience; each font has between 750 and 950 group kerning pairs. This font is available for licensing in opentype and webfont format, as well as for mobile apps, ebooks and for software embedding.OPENTYPE FEATURES:AALTAccesses All Alternate glyphs from the Glyphs panels in Adobe Illustrator or Indesign.CASESets All-Caps to activate case sensitive forms: transform lowercase letters, figures and some extra signs to Uppercase; vertically aligns math symbols and punctuation.DNOM & NUMRTransforms 0 to 9 figures into numerators (aligned to cap height) and denominators (aligned to baseline).FRACCustom fractions generation feature.SUPSTransforms 0 to 9 figures into superiors.LOCLRomanian, Moldavian and Polish advanced diacritics support; automatic Catalan punt volant; Dutch localization for accented ij; localization for Turkish i (works also for Kazakh, Tatar, Crimean Tatar, Azeri. Just select your text language to activate the localized accents)CALTdetects German in an uppercase string and substitute it with its uppercase version/ SS01 / SALTAlternate Q letter shape for ultra narrow line heights.Implemented both as Stylistic Set n1 (ss01) and Stylistic Alternate (salt) to maximize compatibility between applications.SS02 / SALTAlternate N letter shape. Implemented both as Stylistic Set n2 (ss02) and Stylistic Alternate (salt) to maximize compatibility between applications.SS03 / SALTAlternate I letter shape. Implemented both as Stylistic Set n3 (ss03) and Stylistic Alternate (salt) to maximize compatibility between applications.SS04 / SALTAlternate J letter shape. Implemented both as Stylistic Set n4 (ss04) and Stylistic Alternate (salt) to maximize compatibility between applications.SS05 / SALTAlternate Y letter shape. Implemented both as Stylistic Set n5 (ss05) and Stylistic Alternate (salt) to maximize compatibility between applications.LNUM/ONUMLining / oldstyle figures; LNUM transforms numbers and monetary symbols in Uppercase; ONUM do the opposite (default figures are ONUM).TNUM / PNUMTabular/ proportional figures. Figures (numbers, monetary and math symbols) of same width always align, in spite of their weight.ZERO / SALTSlashed zero alternate glyph. Works with tabular and proportional figures, numerators, denominators and superiors. Implemented both as Zero as Salt to maximize compatibility between applications.

Please refer to the EULA (End User License agreement) you received with this software.

green avocado

Regular

1.00 October 28, 2012, initial release

www.dafont.com wino-s-kadir.d2209

weknow Trademark of (http://www.dafont.com/wino-s-kadir.d2209).

weknow (weknow.deviantart.com). 2012. All Rights Reserved

This font was created using FontCreator 5.5 from High-Logic.com

IM FELL English

Italic

2.0

Igino Marini

Igino Marini

2004 Igino Marini www.iginomarini.com

Fell Types - English size - Roman Small Caps. Typeface from the types bequeathed in 1686 to the University of Oxford by John Fell. Originally cut by by Robert Granjon. To be printed at 11.5 points to match the original size. Autokerned using iKern developed by Igino Marini.

This font is a nearly free font. You can use it freely but:a) If you want to use it in publications on any kind of media (paper, CDs or DVDs, web, etc.) you have to put in the following words as a note: The Fell Types are digitally reproduced by Igino Marini. www.iginomarini.com. Then you have to email me and let me know where you used them so I can see your work.b) You cant sell the font.c) You cant rename the font and its contents (including outlines, kerning table and other data, license, copyright, links, etc).d) You cant put the font on a commercial CD-ROM.e) You can distribute it freely but not without this text file youre reading attached.f) You can put this font online on your own site but after having put a link to www.iginomarini.com nearby and having consulted me (and got my permission).

MofidMahdi LT

Regular

1.10 Build 106

Linotype GmbH

Moufid Ali Mehdi

Mofid Mahdi is a trademark of Heidelberger Druckmaschinen AG, exclusively licensed through Linotype GmbH, and may be registered in certain jurisdictions.

Copyright 2005 - 2006 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH. Mofid Mahdi is a trademark of Heidelberger Druckmaschinen AG, exclusively licensed through Linotype GmbH, and may be registered in certain jurisdictions. This typeface is original artwork of Moufid Ali Mehdi. The design may be protected in certain jurisdictions.

Mofid Mahdi is a distinctive, bold Arabic display face, suitable for heading and titling work in Arabic newspaper and magazine composition. In this typeface the rounded internal counters and dots contrast with the angular and more robust outlines of the letterforms to give a decorative, harlequin-like appearance. The design was originally developed for use in dry-transfer format, and was first produced as a digital font by Linotype-Hell Ltd. in the early 1980s. Initially a simplified face, with its inherent limited range of letterforms, Mofid Mahdi was enhanced during the late 1980s by the introduction of medial letterforms to improve character spacing and balance. The recent advent of OpenType has led to the release of Mofid Mahdi. This OpenType font includes Latin glyphs from Memphis Extra Bold, allowing users to set text in both most Western European and Arabic languages without switching between fonts. Mofid Mahdi incorporates the Basic Latin character set (Western CP 1252 Latin 1/ANSI and Macintosh US Roman) and the Arabic character set (CP 1256), which supports Arabic, Persian, and Urdu. The font also includes tabular and proportional Arabic, Persian, and Urdu numerals, as well as a set of tabular European (Latin) numerals.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this typeface software either directly from Linotype GmbH or together with software distributed by one of Linotypes licensees.This software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to your workstation for your own use. You may not copy or distribute this software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus dinformacin concernant la contrat dutilisation du logiciel de polices, veuillez consultez notre site www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418