FenwickW00-LightItalic

Regular

4.00

Ray Larabie

Ray Larabie

Fenwick is a trademark of Typodermic Fonts

Copyright (c) 2004 Typodermic Fonts. This font is not freely distributable. Visit typodermic.com for more info.

http://www.typodermic.com

Please read the current Typodermic Fonts license agreement at http://www.typodermic.com/license.html

BradleyTypeW01-BoldItalic

Regular

1.02

International Typeface Corporation

Richard Bradley

Bradley is either a registered trademark or a trademark of International Typeface Corporation

Copyright 2010 International Typeface Corporation. All rights reserved.

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of International Typeface Corporation (ITC) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from ITC or together with software distributed by one of the licencees of ITC.This software is a valuable asset of ITC. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software.If you have any questions concerning your rights you should review the license agreement you received with the software or contact ITC for a copy of the license agreement.General information:www.itcfonts.comFor license terms and usage rights, please visit our web site at:www.itcfonts.com/license

SF Covington

Italic

1.1

ShyFoundry

Derek Vogelpohl

SF Covington Italic is a trademark of ShyFoundry.

Copyright (c) 2008 by ShyFoundry. All rights reserved. Freeware for personal use only. To purchase a commercial license, please visit our site at http://www.shyfoundry.com.

For additional information about the usage of this font, please read the included ShyFoundry Freeware EULA or visit our site at http://www.shyfoundry.com/licensing.

For additional information about the usage of this font, please read the included ShyFoundry Freeware EULA or visit our site at http://www.shyfoundry.com/licensing.

Dessau

Fein

1.10

FTN

Gbor Kthay

Dessau is a trademark of FOUNTAIN/Peter Bruhn, Sweden.

Copyright (c) 2003 by FOUNTAIN/Peter Bruhn, Sweden. All rights reserved. Designed by Gbor Kthay.

Copyright (c) 2003 by FOUNTAIN/Peter Bruhn, Sweden. All rights reserved.

Current license info at www.fountaintype.com

AdmarkW01-Bold

Regular

1.00

Adrian Williams Design Limited.

Adrian Williams

Admark is a registered trade mark of Adrian Williams Design Ltd, UK.

Copyright Adrian Williams Design Ltd 1990. Modified 2006. All rights reserved. Admark is a registered trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1990, with modifications 2006 Adrian Williams Design Ltd. Admark is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

End User License Agreement Adrian Williams Design Ltd trading as Club Type grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Product). Adrian Williams Design Ltd or any other organisation which it appoints to distribute Products under the terms of this agreement shall be hereafter referred to as Distributor. DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.Refund policy for purchased ProductsEnd User can request a refund within 90 days of the purchase by sending a written request to the business address shown at Distributor's website. Please include the transaction information and explain why End User is requesting a refund. When the Distributor initiates a refund, it will communicate with the End User to give the Distributor the opportunity to resolve the reason for refund request. If the refund issue cannot be resolved within 30 days, a refund may be credited to the End User.RegistrationDistributor must be informed of any purchases or other receipts of Products by the End User, sometimes known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use In consideration of payment of the basic purchase price of Product, Product is licensed for use on up to 5 (five) computing devices including Central Processing Units, Networked Terminals or File Server (hereafter referred to as CPUs) at the same site. For the avoidance of doubt Products installed for network use on a single File Server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Additional Licence End User, on receipt of paid invoice or receipt of purchase, acquires limited additional Licence to use purchased Product on multiple CPUs at the site stated and for the total number of CPUs purchased and shown on receipt of purchase or paid invoice solely for its own customary business or personal use. If agreement has been made in writing to evaluate the Product for fitness of purpose, Product must be erased from End User CPUs within the evalaution period of 7 days from the date of purchase.To ensure only original created media is distributed which can be supported by the Distributor, Products may only be distributed to Service Bureaux, Designers, Typesetters, Printers etc., or other external organisation who are third parties to this agreement, provided that; a) if End User requires delivery media support from Distributor the original delivery media is not an unauthorised copy for distribution from those originally distributed by Distributor and that any extra copies of the delivery media required for distribution are purchased from Disributor. b) if End User does not require Disributor to provide delivery media support, End User may freely copy and distribute the delivery media ONLY under the terms of the EULA and this Additional Licence.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way or;b) electronic documents are for personal and or internal business use only;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.End User may embed Products into electronic documents on licensed CPUs provided that;a) electronic documents are for personal use or;b) internal business use and will not be further distributed.Rights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation of Products in accordance with this Agreement and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyEnd User and Distributor acknowledges that Products are the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. End User may not modify, or cause to be modified, the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.End UserEnd User agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsEnd User acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesDistributor's cumulative liabilities for any loss or damage to End User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00 (thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Distributor and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Distributor at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Distributor not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Distributor will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Distributor will not warrant the performance of Products or documentation. If End User fails to prove the Product was obtained from an authorized source, the Distributor shall have no responsibility to correct any faults. The foregoing states the sole extent of Distributor's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Distributor be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Distributor and agrees to be bound by its terms. This agreement inures to the benefit of Distributor and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Distributor and may not be amended except by written consent from Adrian Williams Design Ltd. This agreement will be governed by the laws of the United Kingdom. Contacting UsAdrian Williams Design Ltd, trading as Club Type,44 Mill Lane, Merstham, Redhill, Surrey RH1 3HQ, United Kingdom. Tel: 01737 643300 eFax: 0870 0515681International tel (UK)+44 1737 643300International eFax: (UK)+44 870 0515681Email: adrian@clubtype.co.ukWebsite: http://www.clubtype.co.ukAuthorised Distributors list is available from the Club Type website www.clubtype.co.uk Copyright Adrian Williams Design Limited trading as Club Type 2006.eula206.3

ARB93SteelMsBluntSEP-39CASW01-Bd

Regular

1.00

The Fontry

ARB 93 Steel MsBlunt SEP-39 CAS Bold Italic is a trademark of The Fontry.

Copyright (c) 2009 by The Fontry. All rights reserved.

Copyright (c) 2009 by The Fontry. All rights reserved.

Civita

Light Italic

1.00

Dieter Hofrichter

Dieter Hofrichter

Civita is a trademark of Dieter Hofrichter.

Copyright (c) 2012 by Dieter Hofrichter. All rights reserved.

Hoftype Standard LicenseBy buying this font you are agreeing to be bound by the terms of this Agreement. This Agreement, in conjunction with the receipt that accompanies each purchase from Hoftype, constitutes the complete agreement between you and Hoftype.1. Allowed usesYou may use the licensed fonts to create images on any surface such as computer screens, paper, web pages, photographs, movie credits, printed material, T-shirts, and other surfaces where the image is a fixed size.You may use the licensed fonts to create EPS files or other scalable drawings provided that such files are only used by the household or company licensing the font.2. Number of usersThe maximum number of simultaneous users is specified in the applicable receipt. All users must belong to the same company or household purchasing the font.3. Third partiesYou may provide the font to a graphic designer, printer or other service bureau that is working on your behalf only if they agree to use the font exclusively for your work, agree to the terms of this license, and retain no copies of the font on completion of the work.You may not provide the font or make it accessible to any other third parties.4. EmbeddingYou may embed the licensed fonts into any document you send to third parties provided such embedding is restricted to viewing and printing that document.You may not embed the licensed fonts into software or hardware products in which the fonts will be used by the purchasers of such products. Such use requires a different license (OEM). Please contact g@Hoftype.de for information on OEM licenses.5. ModificationsYou may import characters from the font as graphical objects into a drawing program and modify such graphical objects.You may not modify, adapt, translate, reverse engineer, decompile, disassemble, or create derivative works based on the licensed font itself without Hoftype' prior written consent.6. CopyrightThe font and the accompanying materials are copyrighted and contain proprietary information and trade secrets belonging to the foundry owning the font. Unauthorized copying of the Product even if modified, merged, or included with other software, or of the written materials, is expressly forbidden. You may be held legally responsible for any infringement of the foundrys intellectual property rights that is caused or encouraged by your failure to abide by the terms of this Agreement.7. TerminationThis Agreement is effective until terminated. This Agreement will terminate automatically without notice from Hoftype if you fail to comply with any provision contained herein. Upon termination, you must destroy the written materials, the Product, and all copies of them, in part and in whole, including modified copies, if any.8. Product UpgradesHoftype may, from time to time, update the Product. Product upgrade pricing may apply.9. Disclaimer and Limited WarrantyHoftype warrants the Product to be free from defects in materials and workmanship under normal use for a period of twenty one (21) days from the date of delivery as shown on your receipt. Hoftype' entire liability and your exclusive remedy as to a defective product shall be, at Hoftype' option, either return of purchase price or replacement of any such product that is returned to Hoftype with a copy of the invoice. Hoftype shall have no responsibility to replace the product or refund the purchase price if failure results from accident, abuse or misapplication, or if any product is lost or damaged due to theft, fire, or negligence. Any replacement product will be warranted for twenty one (21) days. This warranty gives you specific legal rights. You may have other rights, which vary from state to state.EXCEPT AS EXPRESSLY PROVIDED ABOVE, THE PRODUCT, IS PROVIDED AS IS. Hoftype DOES NOT MAKE ANY WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.The entire risk as to the quality and performance of the Product rests upon you. Hoftype does not warrant that the functions contained in the Product will meet your requirements or that the operation of the software will be uninterrupted or error free.Hoftype SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FROM LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCT EVEN IF Hoftype HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.10. Governing LawThis agreement is governed by the laws of Germany.

Linotype Ego

Regular

1.00

Linotype GmbH

Jrn Lehnhoff

Ego is a trademark of Linotype GmbH and may be registered in certain jurisdictions.

Copyright 2005 - 2012 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH. Ego is a trademark of Linotype GmbH and may be registered in certain jurisdictions. This typeface is original artwork of Jrn Lehnhoff. The design may be protected in certain jurisdictions.44357

http://www.linotype.com

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this font software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This font software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this font software is limited to your workstation for your own use. You may not copy or distribute this font software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informations concernant le contrat d'utilisation du logiciel de polices, veuillez consulter notre site web www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418

ITCMixageW01-Medium

Regular

1.00

Aldo Novarese

ITC Mixage is a trademark of International Typeface Corporation Registered in U.S. Patent & Trademark Office and may be registered in certain other jurisdictions.

Copyright 2002 International Typeface Corporation. All rights reserved.

Please review the description of this font at http://www.itcfonts.com.