BulldogW01-BoldItalic

Regular

1.00

Adrian Williams Design Ltd.

Adrian Williams

Bulldog is a registered trade mark of Adrian Williams Design Ltd, UK.

Copyright Adrian Williams Design Ltd 1989. Modified 2003. All rights reserved. Bulldog is a trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1989, with modifications 2003 Adrian Williams Design Ltd. Bulldog is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

End User License Agreement Adrian Williams Design Ltd trading as Club Type grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Product). Adrian Williams Design Ltd or any other organisation which it appoints to distribute Products under the terms of this agreement shall be hereafter referred to as Distributor. DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.Refund policy for purchased ProductsEnd User can request a refund within 90 days of the purchase by sending a written request to the business address shown at Distributor's website. Please include the transaction information and explain why End User is requesting a refund. When the Distributor initiates a refund, it will communicate with the End User to give the Distributor the opportunity to resolve the reason for refund request. If the refund issue cannot be resolved within 30 days, a refund may be credited to the End User.RegistrationDistributor must be informed of any purchases or other receipts of Products by the End User, sometimes known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use In consideration of payment of the basic purchase price of Product, Product is licensed for use on up to 5 (five) computing devices including Central Processing Units, Networked Terminals or File Server (hereafter referred to as CPUs) at the same site. For the avoidance of doubt Products installed for network use on a single File Server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Additional Licence End User, on receipt of paid invoice or receipt of purchase, acquires limited additional Licence to use purchased Product on multiple CPUs at the site stated and for the total number of CPUs purchased and shown on receipt of purchase or paid invoice solely for its own customary business or personal use. If agreement has been made in writing to evaluate the Product for fitness of purpose, Product must be erased from End User CPUs within the evalaution period of 7 days from the date of purchase.To ensure only original created media is distributed which can be supported by the Distributor, Products may only be distributed to Service Bureaux, Designers, Typesetters, Printers etc., or other external organisation who are third parties to this agreement, provided that; a) if End User requires delivery media support from Distributor the original delivery media is not an unauthorised copy for distribution from those originally distributed by Distributor and that any extra copies of the delivery media required for distribution are purchased from Disributor. b) if End User does not require Disributor to provide delivery media support, End User may freely copy and distribute the delivery media ONLY under the terms of the EULA and this Additional Licence.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way or;b) electronic documents are for personal and or internal business use only;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.End User may embed Products into electronic documents on licensed CPUs provided that;a) electronic documents are for personal use or;b) internal business use and will not be further distributed.Rights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation of Products in accordance with this Agreement and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyEnd User and Distributor acknowledges that Products are the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. End User may not modify, or cause to be modified, the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.End UserEnd User agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsEnd User acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesDistributor's cumulative liabilities for any loss or damage to End User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00 (thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Distributor and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Distributor at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Distributor not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Distributor will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Distributor will not warrant the performance of Products or documentation. If End User fails to prove the Product was obtained from an authorized source, the Distributor shall have no responsibility to correct any faults. The foregoing states the sole extent of Distributor's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Distributor be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Distributor and agrees to be bound by its terms. This agreement inures to the benefit of Distributor and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Distributor and may not be amended except by written consent from Adrian Williams Design Ltd. This agreement will be governed by the laws of the United Kingdom. Contacting UsAdrian Williams Design Ltd, trading as Club Type,44 Mill Lane, Merstham, Redhill, Surrey RH1 3HQ, United Kingdom. Tel: 01737 643300 eFax: 0870 0515681International tel (UK)+44 1737 643300International eFax: (UK)+44 870 0515681Email: adrian@clubtype.co.ukWebsite: http://www.clubtype.co.ukAuthorised Distributors list is available from the Club Type website www.clubtype.co.uk Copyright Adrian Williams Design Limited trading as Club Type 2006.eula206.3

Written on His Hands

Regular

1.003

Kimberly Geswein

Kimberly Geswein

Copyright (c) 2010 by Kimberly Geswein. All rights reserved.

Copyright (c) 2010 by Kimberly Geswein. All rights reserved.

Free for personal use. For commercial use, please send a one-time US5 payment to gesweinfamily@gmail.com via paypal.com

ITC Weidemann

Book

3.00

International Typeface Corporation

Kurt Weidemann

ITC Weidemann is a trademark of International Typeface Corporation Registered in U.S. Patent and Trademark Office and may be registered in certain other jurisdictions.

Font software Copyright 1990, 2001 Adobe Systems Incorporated. Typeface designs Copyright 2007 International Typeface Corporation. All rights reserved.

http://www.itcfonts.com

NOTIFICATION OF LICENSE AGREEMENT This typeface is the property of International Typeface Corporation (ITC) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from ITC or together with software distributed by one of the licencees of ITC. This software is a valuable asset of ITC. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software or contact ITC for a copy of the license agreement. General information:www.itcfonts.comFor license terms and usage rights, please visit our web site at:www.itcfonts.com/license

Andes Rounded

SemiBold

1.00

Daniel Hernndez

Daniel Hernndez

Andes Rounded SemiBold is a trademark of Daniel Hernndez.

Copyright (c) 2014 by Daniel Hernndez. All rights reserved.

Copyright (c) 2014 by Daniel Hernndez. All rights reserved.

Open Sans

Italic

1.10

Ascender Corporation

Open Sans is a trademark of Google and may be registered in certain jurisdictions.

Digitized data copyright 2010-2011, Google Corporation.

Licensed under the Apache License, Version 2.0

Year2000 Context Regular

Regular

Glitch fonts

Koen Hachmang

Copyright 1999 Koen Hachmang. All rights reserved.

A freeware font by Koen Hachmang, The Netherlands.E-Mail: nxus@wxs.nlHome: http://home.wxs.nl/~hachmang/Fonts: http://home.wxs.nl/~hachmang/glitch/

End-user license agreement software product from Glitch Freeware Fonts.SOFTWARE PRODUCT LICENSEThe SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.1. GRANT OF LICENSE. This document grants you the following rights:- Installation and Use. You may install and use an unlimited number of copies of the SOFTWARE PRODUCT.- Reproduction and Distribution. You may reproduce and distribute an unlimited number of copies of the SOFTWARE PRODUCT; provided that each copy shall be a true and complete copy, including all copyright and trademark notices (if applicable) , and shall be accompanied by a copy of this licence. Copies of the SOFTWARE PRODUCT may not be distributed for profit either on a standalone basis or included as part of your own product unless by prior permission of the author.2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS. - Restrictions on Alteration. You may not rename, edit or create any derivative works from the SOFTWARE PRODUCT, other than subsetting when embedding them in documents unless you have permission from the author.LIMITED WARRANTYNO WARRANTIES. Glitch Freeware Fonts expressly disclaims any warranty for the SOFTWARE PRODUCT. The SOFTWARE PRODUCT and any related documentation is provided as is without warranty of any kind, either express or implied, including, without limitation, the implied warranties ormerchantability, fitness for a particular purpose, or noninfringement. The entire risk arising out of use or performance of the SOFTWARE PRODUCT remains with you.NO LIABILITY FOR CONSEQUENTIAL DAMAGES. In no event shall Glitch Freeware Fonts be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or any other pecuniary loss) arising out of the use of or inability to use this product, even if Glitch Freeware Fonts has been advised of the possibility of such damages.3. MISCELLANEOUSShould you have any questions concerning this document, or if you desire to contact Glitch Freeware Fonts for any reason, please contact nxus@wxs.nl, or write:Koen Hachmang,Goudsbloem 91,5071 EW Udenhout,The Netherlands.

Futurex Bitmax

Regular

1.1

Jens Czaplo

Graham Meade, Jens Czaplo and Apostrophic Lab, 2001. This font is part of the Futurex Project. For more information visit www.apostrophiclab.com

Graham Meade, Jenz Czaplo and Apostrophic Lab, 2001. This font is part of the Futurex Project. For more information visit www.apostrophiclab.com

MattiaITCW01

Regular

1.01

International Typeface Corporation

ITC is a trademark of International Typeface Corporation Registered in U.S. Patent and Trademark Office and may be registered in certain other jurisdictions; Mattia is a trademark of International Typeface Corporation and may be registered

Copyright 2007 International Typeface Corporation. All rights reserved. Mattia ITC is designed by Giuseppe Errico.

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of International Typeface Corporation (ITC) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from ITC or together with software distributed by one of the licencees of ITC.This software is a valuable asset of ITC. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software.If you have any questions concerning your rights you should review the license agreement you received with the software or contact ITC for a copy of the license agreement.General information:www.itcfonts.comFor license terms and usage rights, please visit our web site at:www.itcfonts.com/license

Alegreya SC

Black

1.003

Juan Pablo del Peral

Juan Pablo del Peral

Alegreya is a trademark of Juan Pablo del Peral

Copyright (c) 2011, Juan Pablo del Peral (juan@huertatipografica.com.ar), with Reserved Font Names Alegreya Alegreya SC

This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is available with a FAQ at: http://scripts.sil.org/OFL