CongressSansW01-LightIt

Regular

1.00

Adrian Williams Design Ltd.

Adrian Williams

Congress is a trade mark of Adrian Williams Design Ltd, UK.

Copyright Adrian Williams Design Ltd 1985. Modified 2005. All rights reserved. Congress is a registered trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1985, with modifications 2005 Adrian Williams Design Ltd. Congress is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

End User License Agreement Adrian Williams Design Ltd (hereafter referred to as Supplier) grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Products). DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.RegistrationEnd User or Distributor of the Products must inform Supplier of a purchase or other distribution of Products, also known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use Products is licensed for use on up to 5 (five) central processing units (computers hereafter referred to as CPUs) at the same site, unless an additional written license has also been given. Products installed for network use on a single file server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way;b) electronic documents are for personal and or business use;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.User may embed Products into electronic documents provided that;a) electronic documents are for personal useb) internal business use and will not be further distributedRights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyUser acknowledges the Product is the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. User may not modify the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.UsersUser agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsUser acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesSuppliers cumulative liabilities for any loss or damage to User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00(thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Supplier and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Supplier at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Supplier not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Supplier will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Supplier will not warrant the performance of Products or documentation. If User fails to prove the Product was obtained from an authorized source, the Supplier shall have no responsibility to correct any faults. The foregoing states the sole extent of Supplier's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Supplier be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Supplier and agrees to be bound by its terms. This agreement inures to the benefit of Supplier and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Supplier and may not be amended except by written consent from Supplier. This agreement will be governed by the laws of the United Kingdom. Copyright Adrian Williams Design Limited trading as Club Type 1995-2005.Contacting UsAdrian Williams Design Ltd, also trades as Club Type, operating from:Buckland House, Grovehill Road, Redhill, Surrey RH1 6TW, United Kingdom. Tel: 01737 789772 eFax: 0870 0515681International tel (UK)+44 1737 789772International eFax: (UK)+44 870 0515681Email: adrian@clubtype.co.ukWebsite: http://www.clubtype.co.ukProducts received outside the United Kingdom may have been distributed to Users by an authorized Distributor. A list of Distributors is available from the Club Type website.February 2005

FilibusterNFW01-Regular

Regular

1.40

Nick's Fonts

Nick Curtis

Copyright (c) 2007-2010, Nick Curtis. All Rights Reserved. Unauthorized duplication or redistribution is expressly prohibited.

By using or installing this font data, you (or you on behalf of your employer) agree to be bound by the terms of this Agreement. This Agreement constitutes the complete agreement between you and Nick's Fonts.Number of Users: In consideration for the license fee paid, Nick's Fonts grants to you only, the Licensee, the non-exclusive, nontransferable right to use and display the font data. If you are using this product for your work, this agreement applies to your employer. Nick's Fonts may be used on up to five (5) CPUs at your site connected to any number of printers or other image-producing devices (regardless of resolutions) at your own site. You may make one (1) copy of the Nick's Fonts font data solely for backup purposes provided the copyright and trademark notices are reproduced in their entirety on the backup copy. Service Bureaus: You may send a copy of any Nick's Fonts font data along with your documents to a commercial printer or other service bureau to enable the editing or printing of your document, provided that such party agrees to delete the font or fonts from his/her/their system upon completion of your project.Portable Documents and Web Fonts. You may use this font data a) to create Portable Font Resources (PFRs) with Bitstream's TrueDoc

Diverda Serif

Bold

2.00

Monotype GmbH

Daniel Lanz

Diverda is a trademark of Monotype GmbH and may be registered in certain jurisdictions.

Copyright 2005 - 2015 Monotype GmbH. All rights reserved.

Diverda Sans is a geometric family of typefaces that are all free from ornament. Swiss designer Daniel Lanz optimized Diverda Sans for maximum legibility. In contrast to many other modern typefaces, which try to squeeze the traditional rounder forms of the alphabet into square designs, and which often attempt to equalize the widths of the capital letters, Diverda Sans remains true to the proper proportions of the Roman alphabet. The x-heights of Diverda's characters are low, and the differences between curved, square, and triangular elements are very clear. Like the more calligraphic typefaces of the past, Diverda's strokes exhibit contrast that is inspired by movements of the pen on paper; down strokes are heavier than up strokes. Possible applications for the Diverda Sans include magazine design, as well as advertising for fashion, design, or architectural products. Because of its 10 different individual styles or weights, Diverda Sans is also a good fit for Corporate Identity solutions.

This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

United Serif Cond

Black

1.101;PS 001.001;hotconv 1.0.38

House Industries

Tal Leming

United is a trademark of House Industries/Brand Design Co., Inc.

Copyright 2006 House Industries/Brand Design Co., Inc. All Rights Reserved.

Part of the United family from House Industries.

House Industries Font Software License AgreementHOUSE INDUSTRIES PRODUCTS MAY NOT BE RETURNED OR EXCHANGED AFTER THE FONTS HAVE BEEN INSTALLED. Please read this agreement carefully! By installing House Industries font software, you are agreeing to the terms of this license. House Industries fonts and artwork are licensed for use on 6 rasterizing devices connected to the same network. A device may be, but is not limited to, a printer, rasterizer, video display terminal, CPU, workstation or any device where the font software is rasterized or display of the House Industries Font is generated from font software outlines. If your configuration exceeds this format, you must call House Industries at 302-234-2356 to expand your site license. If you do not agree to the terms of this software license, please return the software envelope unopened to House Industries, 1145 Yorklyn Road, Post Office Box 166, Yorklyn, Delaware, 19736-0166, U.S.A.1. Each House Industries font is licensed for use on a maximum of six rasterizing devices connected to the same local area network. 2. A multi-device site license upgrade must be purchased for multiple device use according to a multi-device license schedule available at www.houseindustries.com/license. Each location and/or entity must purchase a separate license, starting with the first device. An output device is any printer, such as a Linotronic rasterizer, laser printer, or dot-matrix printer, any video display terminal or any other device where display is generated from the font software outlines, such as with the use of Adobe Type Manager or native TrueType rasterizer if the font is to be used primarily for display terminals that generate the output, as in a multimedia CD. 3. House Industries font software may not be copied or duplicated in any form except for backup purposes. House Industries font software or documentation may not be rented, leased, sublicensed or lent to another person or entity. 4. House Industries font software may not be returned or exchanged unless defective. Defective software shall be replaced by the same software if accompanied with purchase receipt and seller is notified within one week of purchase. 5. Any software, EPS file, illustration, or anything derived from House Industries font software must be used according to the original licensing terms. This means, for example, that any modified House Industries font, or any outline information derived from any House Industries font is still licensed for the same number of devices as the original and may not be sublicensed, given away, or sold without written permission from House Industries. House Industries is responsible for technical support of its officially distributed fonts only. House Industries is not responsible for modified and/or regenerated software. 6. This license does not permit any form of embedding or encrypting of House Industries font software in digital documents or any other form. If embedding of House Industries fonts is desired, the user must purchase an additional license from House Industries based upon usage. If an embedding license is desired, licensee must represent and warrant that licensee's encryption of the embedded House Industries font software is secure enough to prevent access or use by anyone using the software in which the font data is embedded. 7. The user of this House Industries font software agrees to credit House Industries as the trademark and copyright owner of the House Industries fonts and list the font names, wherever and whenever design, production, or any other credits are shown. 8. Any violation by licensee of this agreement shall cause this license to be terminated. In the event of termination, and without limiting any other remedies which may be available against you, you must immediately return the font software to House Industries and certify that no copies remain in your possession or exist on the originally licensed site. 9. House Industries makes no warranties express or implied as to merchantability, fitness for a particular purpose, or otherwise. Without limiting the aforementioned, House Industries shall in no event be liable for any direct, indirect, consequential, or incidental damages, including damages from loss of business profits, business interruption, and loss of business information, arising out of the use or inability to use the product. 10. Multi-device License Upgrade Schedule:House Industries software is automatically licensed for use on a maximum of six rasterizing devices connected to the same local area network. Each location and/or entity must purchase a separate license, starting with the first device. The upgrade price is calculated as a percentage of the original price of the software. The following is cumulative:- up to 10 devices: add 50 percent of original price;- 11 to 50 devices: add 20 percent of original price for each 5 devices;- 51 to 125 devices: add 15 percent of original price for each 5 devices;- 126 to 250 devices: add 10 percent of original price for each 5 devices;- 251 devices and over: add 5 percent of original price for each 5 devices;If your usage exceeds the number of devices for a given output device category, you must purchase the upgrade with the applicable number of devices. Call 302-234-2356 for a quote.

Gang of Three

Regular

Updated Feb. 2007

2007 Vic Fieger

2007 Vic Fieger

Gang Of Three is created with the Font Creator Program from High-Logic.com

DoxW01-Regular

Regular

1.00

Designed by Svetoslav Simov Fontfabric, Inc

Svetoslav Simov

Dox is a trademark of Fontfabric, Inc.

Copyright (c) 2010 by Designed by Svetoslav Simov Fontfabric, Inc. All rights reserved.

Copyright (c) 2010 Designed by Svetoslav Simov Fontfabric, Inc. All rights reserved.

Tanglewood Tales NF

Regular

1.003

Nick's Fonts

Nick Curtis

Copyright(c) 2000, 2001, 2006 Nick Curtis. All Rights Reserved. Distributed under non-exclusive license by 1001 Free Fonts.

By using or installing this font data, you (or you on behalf of your employer) agree to be bound by the terms of this Agreement. This Agreement constitutes the complete agreement between you and Nick's Fonts.YOU MAY:-Send a copy of any Nick's Fonts font data along with your documents to a commercial printer or other service bureau to enable the editing or printing of your document.-Use this font data to embed fonts within PostScript files or PDF files for distribution, viewing, and imaging to third parties.-Use this font for personal projects or for projects for which you are paid including, but not limited to, artwork, logotypes, personalized apparel, word art and web graphics.YOU MAY NOT:-Modify, adapt, translate, reverse engineer, decompile, disassemble or create derivative works based on the Nick's Fonts font data without Nick's Fonts's prior written consent.-Sell this font data AS FONT DATA to a third party under any circumstances including, but not limited to, rubber-stamp alphabets, die-cut alphabets, rub-on alphabets, or digitized fonts for embroidery. NICK'S FONTS SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THE NICK'S FONTS FONT DATA

Radikal

UltraThin Italic

1.00

Nico Inosanto

Radikal UltraThin Italic is a trademark of Nico Inosanto.

Copyright (c) 2013 by Nico Inosanto. All rights reserved.

Radikal W03 Ultra

Flexo Black

Regular

1.06 UltraPrecision Font

Durotype

Ben Blom

Flexo is a trademark of Durotype.

Copyright 2011-2012 Durotype, www.durotype.com. All rights reserved.

This font is the property of Durotype, and its use by you is covered under the terms of a license agreement. This font may not be given away, sold, rented or loaned to others in any way. For full information, see the license agreement you received with this font. www.durotype.com