Cave Gyrl

Cave Gyrl

1999; 1.0, initial release

Copyright (c) Heather Daniels, 1999. All rights reserved.

Linkware, March 27 1999

Woodstock

Regular

1.02

Linotype GmbH

Linotype Design Studio

Woodstock is a trademark of Linotype GmbH and may be registered in certain jurisdictions.

Copyright 2007 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH. Woodstock is a trademark of Linotype GmbH and may be registered in certain jurisdictions. This typeface is original artwork of Linotype Design Studio. The design may be protected in certain jurisdictions.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this font software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This font software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this font software is limited to your workstation for your own use. You may not copy or distribute this font software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informations concernant le contrat d'utilisation du logiciel de polices, veuillez consulter notre site web www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418

DaytonaW01-Light

Regular

1.00

Monotype Imaging Inc.

Jim Wasco

Daytona is a trademark of Monotype Imaging Inc. and may be registered in certain other jurisdictions.

Copyright 2015 Monotype Imaging Inc. All rights reserved.

Inspiration for the Daytona family came from a need to improve the block lettering used in televised sporting events. Jim Wasco, the typefaces designer, drew the design as sturdy squared letters based on humanist shapes and proportions. Letters were designed with legibility in mind, kept narrow for economy of space, and inter-character spacing is open for easy reading. Daytons soft rounded corners also make for a friendly and appealing design.

This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

SpudW00-BoldUpright

Regular

1.1

Australian Type Foundry

Wayne Thompson

Spud BoldUpright is a trademark of Australian Type Foundry.

Copyright (c) 2006 by Australian Type Foundry. All rights reserved.

Copyright (c) 2006 by Australian Type Foundry. All rights reserved.

END USER LICENCE AGREEMENTEach font purchased from Australian Type Foundry (ATF) is licensed for use on 5 personal computers within the purchasing organisation. The end user agrees to receive purchased product from ATF via email transmission unless otherwise specified on the ATF website. The end user agrees NOT to use fonts purchased from ATF for any purpose, commercial, public, personal or otherwise, which constitues an illegal act or an incitement to racial, sexual or gender vilification or any other discriminatory or illegal purposes. The end user agrees not to copy, transmit, reproduce, or imitate any product purchased from ATF for any user outside the purchasing organisation or for any public or commercial purpose, unless permission in writing is obtained from ATF. The end user agrees not to modify the digital construction or coding of fonts purchased from ATF. Copyright and intellectual property remain the sole property of ATF after purchase. By purchasing from ATF you agree to these terms and conditions.ATF warrants to you that the software will perform satisfactorily for the ninety (90) day period following your receipt of the software. This warranty does not apply to font software converted into other formats by the end user. To make a warranty claim, you must return the software to the location where you obtained it along with a copy of your sales receipt within such ninety (90) day period. If the software does not perform satisfactorily, ATF reserves the right to exercise either the replacement of the software or the refund of the license fee you paid for the software. ATF and its suppliers do not and cannot warrant the performance or results you may obtain by using the software.LICENCE AGREEMENT FOR FONT SOFTWAREBetween Australian Type Foundry Pty Ltd (Australian Type Foundry or the licensor) and the End User/Customer (you or the licensee).1. LICENCEThis Licence Agreement for Font Software (Licence Agreement) becomes a legally binding contract between the licensee and the licensor when you access Font Software supplied by electronic delivery methods or open packaging containing Font Software supplied on a storage medium that you have purchased from Australian Type Foundry. Please read all these licence conditions thoroughly and carefully before proceeding. Once you access the Font Software you agree to comply with and be bound by all the conditions contained in this Licence Agreement. If there is any condition in the Licence Agreement that you do not accept, please do not access, use or download the Font Software. Please contact Australian Type Foundry immediately.2. GRANT OF LICENSE AND USAGE RIGHTS2.1 In return for the license fee paid, you are granted a non-exclusive license to use or store the Font Software on a maximum of 5 computers (of any type), whether networked or not, at one location.2.2 If the Font Software is required for use on more than 5 computers or at different locations, this can be achieved by purchasing further copies of the Font Software or by applying to Australian Type Foundry for an appropriate Multi-User, Site, Country or World Wide License, please refer to point 3.2.3 The Font Software may not be used or installed on a server that can be accessed via the Internet or other external network system or by computers that are not part of the 5 user licensed unit.2.4 A copy of the Font Software should always be made for purely back-up purposes.2.5 Except for your right to use the Font Software in accordance with this Licence Agreement, all other rights, title and interest in the Font Software and related trade names and trademarks are owned and retained by Australian Type Foundry and/or its Suppliers.2.6 You agree to establish reasonable procedures to restrict access to and use of the Font Software, trade names and trademarks to comply with the conditions of this Licence Agreement.3. MULTI-USER LICENSES3.1 If you need to use or store the Font Software on more than 5 computers, you need to purchase an appropriate multi-user licence that can be tailored to suit your specific requirements.3.2 When determining the number of computers to be licensed, you must include all computers that might have access to or might store the Font Software at any point in time. The number must include concurrent and non concurrent use.3.3 If the Font Software is stored on a server that is attached to a Local Area Network (LAN) or a Wide Area Network (WAN), every computer that has access to that network must be included in the multi-user licence number to ensure that every computer is properly licensed.3.4 Common multi-user licences can take the form of: a number of licensed computers at a single site; a number of licensed computers at a number of specified sites; a number of licensed computers within a single country, that may be at a number of sites or a number of licensed computers that are licensed for use anywhere in the world.3.5 Please contact Australian Type Foundry if you think that a 5 computer licence is insufficient for your requirements. Australian Type Foundry can then calculate and propose a suitable tailored licence to meet your needs.4. FONT SOFTWARE4.1 The term Font Software relates to the digital font data supplied to you from Australian Type Foundry by electronic or other means. This digital data may include, but is not limited to, a single typeface weight/style, a typeface family, a font or typeface collection/library or any combination of these products.4.2 Font Software includes any updates, upgrades, expansions, modified versions, copies, format or other derivative of the original font data supplied to you from Australian Type Foundry.4.3 The Font Software and all modifications or derivatives of the Font Software shall remain, now and in the future, the exclusive property of Australian Type Foundry and/or its Suppliers.5. EMBEDDING RIGHTS5.1 Embedding of the Font Software into electronic documents, presentations, internet pages or other similar use is only permitted where the Font Software cannot be modified or extracted. You must ensure that where the Font Software is used in such applications that the Font Software is secure and cannot be used for editing purposes or extracted for the creation of new documents.5.2 If you want to create documents or files that permit embedded Font Software to be edited or modified in any way, a separate licence agreement is required that is subject to an additional charge. Please contact Australian Type Foundry for details.6. OTHER RESTRICTIONS6.1 You are not permitted to modify, adapt, translate, reverse engineer, decompile or disassemble the Font Software.6.2 You are not permitted to merge the Font Software with or into other software programs. However, this may be permissible in certain circumstances and would require a separate licence agreement that is subject to an additional charge. Please contact Australian Type Foundry for details.6.3 You are not permitted to use the Font Software, or any component of the Font Software, for or as a basis for your own software development or own Font Software development.6.4 You are not permitted to modify the trademark name, the font name, trade name, licence conditions, any identifying tags or any other part of the Font Software without the express permission of Australian Type Foundry.6.5 All modifications of the Font Software remain the exclusive property of Australian Type Foundry and/or its Suppliers.6.6 Any modifications that are not authorised by Australian Type Foundry in writing invalidate all warranties and support granted with this licence and are deemed to be a breach of this Licence Agreement.7. ASSIGNMENT7.1 You are not authorised to sublicence, sell, lease, rent or lend the Font Software to any third party.7.2 You may permanently transfer all of your rights to use the Font Software to a third party provided that: the third party agrees to be bound by and comply with this Licence Agreement; you transfer this License Agreement together with its associated documentation (if any) and the ori

Slice

Regular

1.000

Arkara

Edy Bagus P

Slice is a trademark of Arkara.

Copyright (c) 2015 by Arkara. All rights reserved.

Copyright (c) 2015 by Arkara. All rights reserved.

DF Inspirations One

Regular

1.00

International Typeface Corporation

Jannine Cabossel

Inspirations is a trademark of International Typeface Corporation and may be registered in certain jurisdictions.

Copyright 1997 International Typeface Corporation. All rights reserved.

Please review the description of this font at http://www.itcfonts.com.

NOTIFICATION OF LICENSE AGREEMENT This typeface is the property of International Typeface Corporation (ITC) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from ITC or together with software distributed by one of the licencees of ITC. This software is a valuable asset of ITC. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software or contact ITC for a copy of the license agreement. General information:www.itcfonts.comFor license terms and usage rights, please visit our web site at:www.itcfonts.com/license

BurfordW01-StripesB

Regular

1.00

Kimmy Design

Kimmy Kirkwood

Burford Stripes B is a trademark of Kimmy Design.

Copyright (c) 2014 by Kimmy Design. All rights reserved.

END USER LICENSE AGREEMENT This copy of Burford (Font Family) (the Software Product) and accompanying documentation is licensed and not sold. This Software Product is protected by copyright laws and treaties, as well as laws and treaties related to other forms of intellectual property. Kimmy Design or its subsidiaries, affiliates, and suppliers (collectively KD) own intellectual property rights in the Software Product. The Licensee's (you or your) license to download, use, copy, or change the Software Product is subject to these rights and to all the terms and conditions of this End User License Agreement (Agreement). Acceptance YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT BY SELECTING THE ACCEPT OPTION AND DOWNLOADING THE SOFTWARE PRODUCT OR BY INSTALLING, USING, OR COPYING THE SOFTWARE PRODUCT. YOU MUST AGREE TO ALL OF THE TERMS OF THIS AGREEMENT BEFORE YOU WILL BE ALLOWED TO DOWNLOAD THE SOFTWARE PRODUCT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU MUST SELECT DECLINE AND YOU MUST NOT INSTALL, USE, OR COPY THE SOFTWARE PRODUCT. License Grant This Agreement entitles you to install and use one copy of the Software Product. In addition, you may make one archival copy of the Software Product. The archival copy must be on a storage medium other than a hard drive, and may only be used for the reinstallation of the Software Product. This Agreement does not permit the installation or use of multiple copies of the Software Product, or the installation of the Software Product on more than one computer at any given time, on a system that allows shared used of applications, on a multi-user network, or on any configuration or system of computers that allows multiple users. Multiple copy use or installation is only allowed if you obtain an appropriate licensing agreement for each user and each copy of the Software Product. Restrictions on Transfer Without first obtaining the express written consent of KD, you may not assign your rights and obligations under this Agreement, or redistribute, encumber, sell, rent, lease, sublicense, or otherwise transfer your rights to the Software Product. Restrictions on Use You may not use, copy, or install the Software Product on any system with more than one computer, or permit the use, copying, or installation of the Software Product by more than one user or on more than one computer. If you hold multiple, validly licensed copies, you may not use, copy, or install the Software Product on any system with more than the number of computers permitted by license, or permit the use, copying, or installation by more users, or on more computers than the number permitted by license. You may not decompile, reverse-engineer, disassemble, or otherwise attempt to derive the source code for the Software Product. You may not use the database portion of the Software Product in connection with any software other than the Software Product. Restrictions on Alteration You may not modify the Software Product or create any derivative work of the Software Product or its accompanying documentation. Derivative works include but are not limited to translations. You may not alter any files or libraries in any portion of the Software Product. You may not reproduce the database portion or create any tables or reports relating to the database portion. Restrictions on Copying You may not copy any part of the Software Product except to the extent that licensed use inherently demands the creation of a temporary copy stored in computer memory and not permanently affixed on storage medium. You may make one archival copy which must be stored on a medium other than a computer hard drive. Limited Software Product Warranty For a period of 10 days days from the date of shipment or from the date that you download the Software Product, as applicable, KD warrants that when properly installed and used under normal conditions, the Software Product will perform substantially as advertised. Disclaimer of Warranties and Limitation of Liability UNLESS OTHERWISE EXPLICITLY AGREED TO IN WRITING BY KD, KD MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, IN FACT OR IN LAW, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OTHER THAN AS SET FORTH IN THIS AGREEMENT OR IN THE LIMITED WARRANTY DOCUMENTS PROVIDED WITH THE SOFTWARE PRODUCT. KD makes no warranty that the Software Product will meet your requirements or operate under your specific conditions of use. KD makes no warranty that operation of the Software Product will be secure, error free, or free from interruption. YOU MUST DETERMINE WHETHER THE SOFTWARE PRODUCT SUFFICIENTLY MEETS YOUR REQUIREMENTS FOR SECURITY AND UNINTERRUPTABILITY. YOU BEAR SOLE RESPONSIBILITY AND ALL LIABILITY FOR ANY LOSS INCURRED DUE TO FAILURE OF THE SOFTWARE PRODUCT TO MEET YOUR REQUIREMENTS. KD WILL NOT, UNDER ANY CIRCUMSTANCES, BE RESPONSIBLE OR LIABLE FOR THE LOSS OF DATA ON ANY COMPUTER OR INFORMATION STORAGE DEVICE. UNDER NO CIRCUMSTANCES SHALL KD, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU OR ANY OTHER PARTY FOR INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL, PUNITIVE, OR EXEMPLARY DAMAGES OF ANY KIND (INCLUDING LOST REVENUES OR PROFITS OR LOSS OF BUSINESS) RESULTING FROM THIS AGREEMENT, OR FROM THE FURNISHING, PERFORMANCE, INSTALLATION, OR USE OF THE SOFTWARE PRODUCT, WHETHER DUE TO A BREACH OF CONTRACT, BREACH OF WARRANTY, OR THE NEGLIGENCE OF KD OR ANY OTHER PARTY, EVEN IF KD IS ADVISED BEFOREHAND OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT THAT THE APPLICABLE JURISDICTION LIMITS KD'S ABILITY TO DISCLAIM ANY IMPLIED WARRANTIES, THIS DISCLAIMER SHALL BE EFFECTIVE TO THE MAXIMUM EXTENT PERMITTED. Limitation of Remedies and Damages Your remedy for a breach of this Agreement or of any warranty included in this Agreement is the correction or replacement of the Software Product. Selection of whether to correct or replace shall be solely at the discretion of KD. KD reserves the right to substitute a functionally equivalent copy of the Software Product as a replacement. If KD is unable to provide a replacement or substitute Software Product or corrections to the Software Product, your sole alternate remedy shall be a refund of the purchase price for the Software Product exclusive of any costs for shipping and handling. Any claim must be made within the applicable warranty period. All warranties cover only defects arising under normal use and do not include malfunctions or failure resulting from misuse, abuse, neglect, alteration, problems with electrical power, acts of nature, unusual temperatures or humidity, improper installation, or damage determined by KD to have been caused by you. All limited warranties on the Software Product are granted only to you and are non-transferable. You agree to indemnify and hold KD harmless from all claims, judgments, liabilities, expenses, or costs arising from your breach of this Agreement and/or acts or omissions. Governing Law, Jurisdiction and Costs This Agreement is governed by the laws of California, without regard to California's conflict or choice of law provisions. Severability If any provision of this Agreement shall be held to be invalid or unenforceable, the remainder of this Agreement shall remain in full force and effect. To the extent any express or implied restrictions are not permitted by applicable laws, these express or implied restrictions shall remain in force and effect to the maximum extent permitted by such applicable laws.

MetalClash

Regular

1.00 September 25, 2013, initial release

Xerographer Fonts

Xerographer Fonts Max Infeld

Typeface (your company). 2013. All Rights Reserved

This font was created using FontCreator 6.0 from High-Logic.com

maxinfeld@hotmail.com

Quitador Sans Pro Medium

Italic

1.00

Monotype Imaging Inc.

Arne Freytag

Quitador is a trademark of trademark of Monotype Imaging Inc. and may be registered in certain jurisdictions.

Copyright 2016 Monotype Imaging Inc. All rights reserved.

The Quitador Sans typeface family is the perfect complement to Arne Freytags Quitador Slab design. The design traits of non-connecting bowl strokes and square shoulders in his slab serif are also at home in Quitador Sans. These distinctive features separate the design from many other sans serifs at large sizes. While at small sizes, they almost disappear leaving an inviting design suitable for a variety of interactive and print textual content.

This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com