Armageda Wide

Regular

1.000

Deepak Singh Dogra

Deepak Singh Dogra

Armageda Wide is a trademark of Deepak Singh Dogra.

Copyright (c) 2015 by Deepak Singh Dogra. All rights reserved.

Copyright (c) 2015 by Deepak Singh Dogra. All rights reserved.

VideoTechOpenOutlineW00-Rg

Regular

1.10

Jonathan Hill

Jonathan Hill

VideoTech Open Outline is a trademark of Jonathan Hill.

Copyright (c) Jonathan Hill, 2008. All rights reserved.

By Installing any of The Northern Block fonts on your computer, you agree to the terms of use set forth by The Northern Block. Details can can be found at: http://www.thenorthernblock.co.uk/fonts_faq.htm. Use of this font software by unlicensed parties is expressly prohibited.

RadiogramW00-SolidTall

Regular

2.00

Rian Hughes / Device Fonts

Rian Hughes

Radiogram Solid Tall is a trademark of Rian Hughes / Device Fonts.

Copyright (c) 2004 by / Device Fonts. All rights reserved.

Copyright (c) 2004 by / Device Fonts. All rights reserved.

BrdaW01-ExtraBold

Regular

1.01

Linotype GmbH

Brda is a trademark of Linotype GmbH and may be registered in certain jurisdictions.

Copyright 2006 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH. Brda is a trademark of Linotype GmbH and may be registered in certain jurisdictions. This typeface is original artwork of Franciszek Otto. The design may be protected in certain jurisdictions.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this font software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This font software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this font software is limited to your workstation for your own use. You may not copy or distribute this font software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informations concernant le contrat d'utilisation du logiciel de polices, veuillez consulter notre site web www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418

BulldogW01-BlackItalic

Regular

1.00

Adrian Williams

Bulldog is a registered trade mark of Adrian Williams Design Ltd, UK.

Copyright Adrian Williams Design Ltd 1989. Modified 2009. All rights reserved. Bulldog is a trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1989, with modifications 2009 Adrian Williams Design Ltd. Bulldog is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

End User License Agreement Adrian Williams Design Ltd trading as Club Type grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Product). Adrian Williams Design Ltd or any other organisation which it appoints to distribute Products under the terms of this agreement shall be hereafter referred to as Distributor. DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.Refund policy for purchased ProductsEnd User can request a refund within 90 days of the purchase by sending a written request to the business address shown at Distributor's website. Please include the transaction information and explain why End User is requesting a refund. When the Distributor initiates a refund, it will communicate with the End User to give the Distributor the opportunity to resolve the reason for refund request. If the refund issue cannot be resolved within 30 days, a refund may be credited to the End User.RegistrationDistributor must be informed of any purchases or other receipts of Products by the End User, sometimes known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use In consideration of payment of the basic purchase price of Product, Product is licensed for use on up to 5 (five) computing devices including Central Processing Units, Networked Terminals or File Server (hereafter referred to as CPUs) at the same site. For the avoidance of doubt Products installed for network use on a single File Server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Additional Licence End User, on receipt of paid invoice or receipt of purchase, acquires limited additional Licence to use purchased Product on multiple CPUs at the site stated and for the total number of CPUs purchased and shown on receipt of purchase or paid invoice solely for its own customary business or personal use. If agreement has been made in writing to evaluate the Product for fitness of purpose, Product must be erased from End User CPUs within the evalaution period of 7 days from the date of purchase.To ensure only original created media is distributed which can be supported by the Distributor, Products may only be distributed to Service Bureaux, Designers, Typesetters, Printers etc., or other external organisation who are third parties to this agreement, provided that; a) if End User requires delivery media support from Distributor the original delivery media is not an unauthorised copy for distribution from those originally distributed by Distributor and that any extra copies of the delivery media required for distribution are purchased from Disributor. b) if End User does not require Disributor to provide delivery media support, End User may freely copy and distribute the delivery media ONLY under the terms of the EULA and this Additional Licence.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way or;b) electronic documents are for personal and or internal business use only;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.End User may embed Products into electronic documents on licensed CPUs provided that;a) electronic documents are for personal use or;b) internal business use and will not be further distributed.Rights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation of Products in accordance with this Agreement and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyEnd User and Distributor acknowledges that Products are the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. End User may not modify, or cause to be modified, the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.End UserEnd User agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsEnd User acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesDistributor's cumulative liabilities for any loss or damage to End User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00 (thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Distributor and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Distributor at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Distributor not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Distributor will, at its own cost, replace defective media or refund the license fee except if misuse has caused the

Joanna Sans Nova

ExtraBold It

1.00

Monotype Imaging Inc.

Terrance Weinzierl

Joanna is a trademark of The Monotype Corporation registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions.

Copyright 2015 The Monotype Corporation. All rights reserved.

Having recently joined Monotype in 2010, Terrance Weinzierl was studying the library of typefaces looking for ways to expand and improve on the many classic designs. Having been a fan of Eric Gills work for some time, the slab serif Joanna stood out. After initial sketches, Terrance decided to pursue a reimagining of Joanna, in a sans serif form. The update to the serif Joanna, named Joanna Nova, was picked up by Ben Jones. After nearly 3 years of research and development, the pair of families were ready to be released. Joanna Sans borrows heavily from Joanna, but takes a direction of its own. It has influences from other Gill faces, like the low contrast of Gill Sans, and the calligraphic nature of Perpetua. The scale of the body and x-height of Joanna Sans have been increased from the original Joanna, to be better suited for contemporary typographic demands. It has the varying width proportions and open aperture of a Humanists sans serif, but retains an easygoing geometric tone. The fluid details and structure of the italics can be elegant and striking, while remaining very legible.

This font software is the property of Monotype Imaging Inc., or one of its affiliated entities (collectively, Monotype) and its use by you is covered under the terms of a license agreement. You have obtained this font software either directly from Monotype or together with software distributed by one of the licensees of Monotype. This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited by the terms of the actual license agreement you have entered into with Monotype. You may not copy or distribute this software. If you have any questions concerning your rights you should review the license agreement you received with the software. You can learn more about Monotype here: www.monotype.com

Adhesive

Medium Italic

1.10

pyrs

Fulguro

Published by Die Gestalten Verlag, 2006 Copyright by Fulguro 2006. All rights reserved.

Published by Die Gestalten Verlag, 2006 Copyright by Fulguro 2006. All rights reserved.

AmandaW01-Regular

Regular

1.02

Monotype Imaging Inc.

Tom Rickner

Amanda is a trademark of Monotype Imaging Inc. and may be registered in certain jurisdictions.

Font software copyright 1996, 2007 Monotype Imaging Inc. All rights reserved.

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of Monotype Imaging Inc. and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from Monotype Imaging or together with software distributed by one of the licencees of Monotype Imaging.This software is a valuable asset of Monotype Imaging. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software.If you have any questions concerning your rights you should review the license agreement you received with the software or contact Monotype Imaging for a copy of the license agreement.General information:www.fonts.comFor license terms and usage rights, please visit our web site at:www.monotypeimaging.com/html/type/license.htmlLizenzbedingungen und Nutzungsrechte finden Sie auf unserer Webseite:www.monotypeimaging.com/html/type/license.htmlPour plus d'informations concernant les droits d'utilisation et les questions contractuelles, veuillez consultez notre site:www.monotypeimaging.com/html/type/license.htmlPara obtener informacin acerca de los trminos de licencia y los derechos de uso, visite nuestro sitio en el Web en:www.monotypeimaging.com/html/type/license.htmlPer le condizioni contrattuali ed i diritti d'uso, visitate il nostro sito web all'indirizzo:www.monotypeimaging.com/html/type/license.html

AspiraXXNarW01-Regular

Regular

1.5

Durotype

Ben Blom

Aspira is a trademark of Durotype.

Copyright 2012-2014 Durotype, www.durotype.com. All rights reserved.

This font is the property of Durotype, and its use by you is covered under the terms of a license agreement. This font may not be given away, sold, rented or loaned to others in any way. For full information, see the license agreement you received with this font. www.durotype.com