CongressSansW01-Light

Regular

1.00

Adrian Williams Design Ltd.

Adrian Williams

Congress is a trade mark of Adrian Williams Design Ltd, UK.

Copyright Adrian Williams Design Ltd 1985. Modified 2005. All rights reserved. Congress is a registered trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1985, with modifications 2005 Adrian Williams Design Ltd. Congress is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

End User License Agreement Adrian Williams Design Ltd (hereafter referred to as Supplier) grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Products). DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.RegistrationEnd User or Distributor of the Products must inform Supplier of a purchase or other distribution of Products, also known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use Products is licensed for use on up to 5 (five) central processing units (computers hereafter referred to as CPUs) at the same site, unless an additional written license has also been given. Products installed for network use on a single file server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way;b) electronic documents are for personal and or business use;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.User may embed Products into electronic documents provided that;a) electronic documents are for personal useb) internal business use and will not be further distributedRights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyUser acknowledges the Product is the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. User may not modify the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.UsersUser agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsUser acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesSuppliers cumulative liabilities for any loss or damage to User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00(thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Supplier and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Supplier at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Supplier not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Supplier will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Supplier will not warrant the performance of Products or documentation. If User fails to prove the Product was obtained from an authorized source, the Supplier shall have no responsibility to correct any faults. The foregoing states the sole extent of Supplier's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Supplier be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Supplier and agrees to be bound by its terms. This agreement inures to the benefit of Supplier and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Supplier and may not be amended except by written consent from Supplier. This agreement will be governed by the laws of the United Kingdom. Copyright Adrian Williams Design Limited trading as Club Type 1995-2005.Contacting UsAdrian Williams Design Ltd, also trades as Club Type, operating from:Buckland House, Grovehill Road, Redhill, Surrey RH1 6TW, United Kingdom. Tel: 01737 789772 eFax: 0870 0515681International tel (UK)+44 1737 789772International eFax: (UK)+44 870 0515681Email: adrian@clubtype.co.ukWebsite: http://www.clubtype.co.ukProducts received outside the United Kingdom may have been distributed to Users by an authorized Distributor. A list of Distributors is available from the Club Type website.February 2005

EatwellW00-Tall

Regular

1.00

Chank Co

Chank Diesel

Eatwell is a trademark of Chank Co.

Copyright (c) Chank Co, 2010. All rights reserved. Do not redistribute without permission.

See https://www.chank.com/license . Do not redistribute this font without permission.

Swing Thing Dings LT

Regular

1.00 October 24, 2005, initial release

Typeface (your company). 2005. All Rights Reserved

This font was created using Font Creator 5.0 from High-Logic.com

DracenaW00-Regular

Regular

1.00

Aerotype

Stephen Miggas

Dracena is a trademark of Aerotype.

Copyright (c) Aerotype, 2006. All rights reserved.

Thank you for choosing Aerotype digital type products. Aerotype Software License AgreementThe right to use this product is sold only on the condition that you, the Customer, agree to the following license. If you do not agree to the terms of the license, do Not open the disk package. Promptly return the unopened disk package and any other materials that are part of this Aerotype product together with a copy of your proof of payment, within 10 days for a full refund. By opening the accompanying sealed diskette package, you accept terms and conditions of this licensing agreement. 1. Grant of License In consideration of payment of the license fee, which is part of the price you paid for this Software Product, Aerotype grants you the right to use one (1) copy of the enclosed Software Product (the 'Software') on a single computer. If the Software is used on a network, one licensed copy of the Software may be used on up to five (5) network stations and one (1) printer. Aerotype reserves all rights not expressly granted by this license.2. Ownership and Obligations The Software is property of Aerotype. When you purchased this product, you purchased the magnetic or other physical media on which the Software was originally or subsequently fixed or recorded, but Aerotype retains all title and ownership in the Software recorded on the original disk copy and all subsequent copies of the Software regardless of the form or media in or on which the original and other copies may exist. The license is not a sale of the original Software or any portion or copy of it. Except as stated above, this agreement does not grant you any rights to the intellectual property rights in the Software.3. Other Restrictions The Software and accompanying materials are copyrighted, and are protected by United States copyright laws, and international agreements. You may not duplicate the software except for installation on one computer, and for archival (back-up) purposes, provided the archival copy bears the copyright notices contained on the original product. Unauthorized copying of the Software, even if modified, merged, or included with other software, or of the written materials is expressly forbidden.4. Assignment You may assign your rights under this agreement to a third party who agrees to be bound by this agreement prior to the assignment, provided that you transfer all copies of the Software and related documents to the third party or destroy all copies not transferred. You may not assign your rights under this agreement or rent, loan, lease, distribute, or otherwise transfer the Software, except as set forth above. You agree that the Software will not be shipped, transferred, or exported into any country or used in any manner inconsistent with the laws of the United States.5. Limited Warranty Aerotype warrants this product to be free of defects in material and workmanship when used in accordance with the documentation for a period of thirty (30) days from the date of purchase as evidenced by a copy of your receipt. If the Software fails to comply with this limited warrantee, Aerotype's entire liability is limited to replacement of the defective diskette(s). Aerotype shall have no liability for any failure of any diskette resulting from accident, abuse, or misapplication of the product. This remedy is not available outside the United States. Except for the above Limited Warranty, Aerotype makes no warranties, expressed or implied, as to merchantability, or fitness for a particular purpose.6. Limit of Liability In no event will Aerotype be liable for any consequential or incidental damages resulting from the use of the Software, including without limitation, damages for lost profits or lost savings, business interruption, loss of business information, or for any claim by any party, even if an Aerotype representative has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.This agreement will be governed by the laws of the State of California excluding the application of its conflicts of law rules.

Kingthings Slipperylip

Regular

1.0

Monotype Typography

Monotype Type Drawing Office - Stanley Morison, Victor Lardent 1932

Kingthings Slipperylip Trademark of Kingthings

Kingthings Slipperylip Kingthings 2008. All Rights Reserved

This remarkable typeface first appeared in 1932 in The Times of London newspaper, for which it was designed. It has subsequently become one of the worlds most successful type creations. The original drawings were made under Stanley Morison's direction by Victor Lardent at The Times. It then went through an extensive iterative process involving further work in Monotype's Type Drawing Office. Based on experiments Morison had conducted using Perpetua and Plantin, it has many old style characteristics but was adapted to give excellent legibility coupled with good economy. Widely used in books and magazines, for reports, office documents and also for display and advertising.

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of Monotype Typography and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from Monotype or together with software distributed by one of Monotypes licensees.This software is a valuable asset of Monotype. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to your workstation for your own publishing use. You may not copy or distribute this software.If you have any question concerning your rights you should review the license agreement you received with the software or contact Monotype for a copy of the license agreement.Monotype can be contacted at:USA - (847) 718-0400UK - 01144 01737 765959http://www.monotype.com

NewslabW01-Thin

Regular

1.0

Daniel Hernandez

Daniel Hernandez

Newslab Thin is a trademark of Daniel Hernandez.

Copyright (c) 2013 by Daniel Hernandez. All rights reserved.

Copyright (c) 2013 by Daniel hernndez. All rights reserved.

UhBee RingRing

Bold

1.00 May 15, 2012, initial release

Made with Scanahand. Copyright UhBee.com 2012. All Rights Reserved.

This font was created using Scanahand from High-Logic.com