VectipedeW00-UltraLight

Regular

1.00

Ray Larabie

Ray Larabie

Vectipede is a trademark of Typodermic Fonts

Copyright (c) 2010 Typodermic Fonts. This font is not freely distributable. Kerning & languages by Chikako Larabie

To see more fonts by Ray Larabie, visit Typodermic.com and LarabieFonts.com

MajorEarthquake

Regular

1.00 May 27, 2012, initial release

Xerographer.com

max infeld

Typeface (your company). 2012. All Rights Reserved

This font was created using FontCreator 6.0 from High-Logic.com

mailto:maxinfeld@gmail.com

Oki

Regular

1.00 May 30, 2014, initial release

http://www.myfonts.com/foundry/Q-BO/

Carlos Matteoli a.k.a. Qbotype

Qbotype

Oki (By Carlos Matteoli a.k.a Qbotype). 2014. All Rights Reserved

This font was created using FontCreator 6.0 from High-Logic.com

NOT allow commercial use of this typography. Only buying the full version. By downloading this source, you may only use personally. For information on purchase or use licenses, refer to: carlosmatteoli@gmail.com or qbotype@gmail.comThank you very much.NO se permite el uso comercial de esta tipografa. Slamente comprando la versin completa. Al descargar esta fuente, usted podra usarla de forma personal unicamente. Para cualquier informacin sobre compra o licencias de uso, consulte a: carlosmatteoli@gmail.com o qbotype@gmail.comMuchas gracias.

MattiaITCW01

Regular

1.01

International Typeface Corporation

ITC is a trademark of International Typeface Corporation Registered in U.S. Patent and Trademark Office and may be registered in certain other jurisdictions; Mattia is a trademark of International Typeface Corporation and may be registered

Copyright 2007 International Typeface Corporation. All rights reserved. Mattia ITC is designed by Giuseppe Errico.

NOTIFICATION OF LICENSE AGREEMENTThis typeface is the property of International Typeface Corporation (ITC) and its use by you is covered under the terms of a license agreement. You have obtained this typeface software either directly from ITC or together with software distributed by one of the licencees of ITC.This software is a valuable asset of ITC. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to use on up to five (5) workstation for your own publishing use. You may not copy or distribute this software.If you have any questions concerning your rights you should review the license agreement you received with the software or contact ITC for a copy of the license agreement.General information:www.itcfonts.comFor license terms and usage rights, please visit our web site at:www.itcfonts.com/license

ChaletBookTTSC

Bold

1.00 2003 initial release

House Industries/Brand Design Co. Inc,

House Industries

Copyright (c) House Industries/Brand Design Co. Inc, 2003. All rights reserved.

Created for the House Book.

House Industries Font Software License AgreementHOUSE INDUSTRIES PRODUCTS MAY NOT BE RETURNED OR EXCHANGED AFTER THE FONTS HAVE BEEN INSTALLED. Please read this agreement carefully! By installing House Industries font software, you are agreeing to the terms of this license. House Industries fonts and artwork are licensed for use on 6 rasterizing devices connected to the same network. A device may be, but is not limited to, a printer, rasterizer, video display terminal, CPU, workstation or any device where the font software is rasterized or display of the House Industries Font is generated from font software outlines. If your configuration exceeds this format, you must call House Industries at 302-234-2356 to expand your site license. If you do not agree to the terms of this software license, please return the software envelope unopened to House Industries, 1145 Yorklyn Road, Post Office Box 166, Yorklyn, Delaware, 19736-0166, U.S.A.1. Each House Industries font is licensed for use on a maximum of six rasterizing devices connected to the same local area network. 2. A multi-device site license upgrade must be purchased for multiple device use according to a multi-device license schedule available at www.houseindustries.com/license. Each location and/or entity must purchase a separate license, starting with the first device. An output device is any printer, such as a Linotronic rasterizer, laser printer, or dot-matrix printer, any video display terminal or any other device where display is generated from the font software outlines, such as with the use of Adobe Type Manager or native TrueType rasterizer if the font is to be used primarily for display terminals that generate the output, as in a multimedia CD. 3. House Industries font software may not be copied or duplicated in any form except for backup purposes. House Industries font software or documentation may not be rented, leased, sublicensed or lent to another person or entity. 4. House Industries font software may not be returned or exchanged unless defective. Defective software shall be replaced by the same software if accompanied with purchase receipt and seller is notified within one week of purchase. 5. Any software, EPS file, illustration, or anything derived from House Industries font software must be used according to the original licensing terms. This means, for example, that any modified House Industries font, or any outline information derived from any House Industries font is still licensed for the same number of devices as the original and may not be sublicensed, given away, or sold without written permission from House Industries. House Industries is responsible for technical support of its officially distributed fonts only. House Industries is not responsible for modified and/or regenerated software. 6. This license does not permit any form of embedding or encrypting of House Industries font software in digital documents or any other form. If embedding of House Industries fonts is desired, the user must purchase an additional license from House Industries based upon usage. If an embedding license is desired, licensee must represent and warrant that licensees encryption of the embedded House Industries font software is secure enough to prevent access or use by anyone using the software in which the font data is embedded. 7. The user of this House Industries font software agrees to credit House Industries as the trademark and copyright owner of the House Industries fonts and list the font names, wherever and whenever design, production, or any other credits are shown. 8. Any violation by licensee of this agreement shall cause this license to be terminated. In the event of termination, and without limiting any other remedies which may be available against you, you must immediately return the font software to House Industries and certify that no copies remain in your possession or exist on the originally licensed site. 9. House Industries makes no warranties express or implied as to merchantability, fitness for a particular purpose, or otherwise. Without limiting the aforementioned, House Industries shall in no event be liable for any direct, indirect, consequential, or incidental damages, including damages from loss of business profits, business interruption, and loss of business information, arising out of the use or inability to use the product. 10. Multi-device License Upgrade Schedule:House Industries software is automatically licensed for use on a maximum of six rasterizing devices connected to the same local area network. Each location and/or entity must purchase a separate license, starting with the first device. The upgrade price is calculated as a percentage of the original price of the software. The following is cumulative:- up to 10 devices: add 50 percent of original price;- 11 to 50 devices: add 20 percent of original price for each 5 devices;- 51 to 125 devices: add 15 percent of original price for each 5 devices;- 126 to 250 devices: add 10 percent of original price for each 5 devices;- 251 devices and over: add 5 percent of original price for each 5 devices;If your usage exceeds the number of devices for a given output device category, you must purchase the upgrade with the applicable number of devices. Call 302-234-2356 for a quote.

CF Quebec Stamp

Regular

1.00 2014

CloutierFontes

Steve Cloutier

CF Quebec Stamp is a trademark of CloutierFontes.

Copyright (c) 2014 by CloutierFontes. All rights reserved.

CF Quebec Stamp Regular is a font by CloutierFontes, designed by Steve Cloutier in 2014.

Free for personal use (no profit) - For commercial use (profit) you need buy a license at: www.cloutierfontes.ca - Thank You !

CivitaW01-MediumItalic

Regular

1.00

Dieter Hofrichter

Dieter Hofrichter

Civita is a trademark of Dieter Hofrichter.

Copyright (c) 2012 by Dieter Hofrichter. All rights reserved.

Hoftype Standard LicenseBy buying this font you are agreeing to be bound by the terms of this Agreement. This Agreement, in conjunction with the receipt that accompanies each purchase from Hoftype, constitutes the complete agreement between you and Hoftype.1. Allowed usesYou may use the licensed fonts to create images on any surface such as computer screens, paper, web pages, photographs, movie credits, printed material, T-shirts, and other surfaces where the image is a fixed size.You may use the licensed fonts to create EPS files or other scalable drawings provided that such files are only used by the household or company licensing the font.2. Number of usersThe maximum number of simultaneous users is specified in the applicable receipt. All users must belong to the same company or household purchasing the font.3. Third partiesYou may provide the font to a graphic designer, printer or other service bureau that is working on your behalf only if they agree to use the font exclusively for your work, agree to the terms of this license, and retain no copies of the font on completion of the work.You may not provide the font or make it accessible to any other third parties.4. EmbeddingYou may embed the licensed fonts into any document you send to third parties provided such embedding is restricted to viewing and printing that document.You may not embed the licensed fonts into software or hardware products in which the fonts will be used by the purchasers of such products. Such use requires a different license (OEM). Please contact g@Hoftype.de for information on OEM licenses.5. ModificationsYou may import characters from the font as graphical objects into a drawing program and modify such graphical objects.You may not modify, adapt, translate, reverse engineer, decompile, disassemble, or create derivative works based on the licensed font itself without Hoftype' prior written consent.6. CopyrightThe font and the accompanying materials are copyrighted and contain proprietary information and trade secrets belonging to the foundry owning the font. Unauthorized copying of the Product even if modified, merged, or included with other software, or of the written materials, is expressly forbidden. You may be held legally responsible for any infringement of the foundrys intellectual property rights that is caused or encouraged by your failure to abide by the terms of this Agreement.7. TerminationThis Agreement is effective until terminated. This Agreement will terminate automatically without notice from Hoftype if you fail to comply with any provision contained herein. Upon termination, you must destroy the written materials, the Product, and all copies of them, in part and in whole, including modified copies, if any.8. Product UpgradesHoftype may, from time to time, update the Product. Product upgrade pricing may apply.9. Disclaimer and Limited WarrantyHoftype warrants the Product to be free from defects in materials and workmanship under normal use for a period of twenty one (21) days from the date of delivery as shown on your receipt. Hoftype' entire liability and your exclusive remedy as to a defective product shall be, at Hoftype' option, either return of purchase price or replacement of any such product that is returned to Hoftype with a copy of the invoice. Hoftype shall have no responsibility to replace the product or refund the purchase price if failure results from accident, abuse or misapplication, or if any product is lost or damaged due to theft, fire, or negligence. Any replacement product will be warranted for twenty one (21) days. This warranty gives you specific legal rights. You may have other rights, which vary from state to state.EXCEPT AS EXPRESSLY PROVIDED ABOVE, THE PRODUCT, IS PROVIDED AS IS. Hoftype DOES NOT MAKE ANY WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.The entire risk as to the quality and performance of the Product rests upon you. Hoftype does not warrant that the functions contained in the Product will meet your requirements or that the operation of the software will be uninterrupted or error free.Hoftype SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FROM LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCT EVEN IF Hoftype HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.10. Governing LawThis agreement is governed by the laws of Germany.

RamaSlabCW01-Light

Regular

1.00

Ryoichi Tsunekawa

Ryoichi Tsunekawa

Rama Slab C Light is a trademark of Ryoichi Tsunekawa.

Copyright (c) 2011 by Ryoichi Tsunekawa. All rights reserved.

Copyright (c) 2011 by Ryoichi Tsunekawa. All rights reserved.