MaduraiSlabW01-CndBdIt

Regular

1.00

Jeremy Dooley

www.insignedesign.com

Madurai is a trademark of Jeremy Dooley.

Copyright (c) 2012 by Jeremy Dooley. All rights reserved.

Copyright (c) 2012 by . All rights reserved.

CongressSansW01-CondXBold

Regular

1.00

Adrian Williams Design Ltd.

Adrian Williams

Congress is a registered trade mark of Adrian Williams Design Ltd, UK.

Copyright Adrian Williams Design Ltd 1985. Modified 2005, 2007. All rights reserved. Congress is a registered trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1985, with modifications 2005, 2007 Adrian Williams Design Ltd. Congress is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

End User License Agreement Adrian Williams Design Ltd (hereafter referred to as Supplier) grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Products). DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.RegistrationEnd User or Distributor of the Products must inform Supplier of a purchase or other distribution of Products, also known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use Products is licensed for use on up to 5 (five) central processing units (computers hereafter referred to as CPUs) at the same site, unless an additional written license has also been given. Products installed for network use on a single file server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way;b) electronic documents are for personal and or business use;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.User may embed Products into electronic documents provided that;a) electronic documents are for personal useb) internal business use and will not be further distributedRights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyUser acknowledges the Product is the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. User may not modify the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.UsersUser agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsUser acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesSuppliers cumulative liabilities for any loss or damage to User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00(thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Supplier and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Supplier at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Supplier not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Supplier will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Supplier will not warrant the performance of Products or documentation. If User fails to prove the Product was obtained from an authorized source, the Supplier shall have no responsibility to correct any faults. The foregoing states the sole extent of Supplier's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Supplier be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Supplier and agrees to be bound by its terms. This agreement inures to the benefit of Supplier and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Supplier and may not be amended except by written consent from Supplier. This agreement will be governed by the laws of the United Kingdom. Copyright Adrian Williams Design Limited trading as Club Type 1995-2005.Contacting UsAdrian Williams Design Ltd, also trades as Club Type, operating from:Buckland House, Grovehill Road, Redhill, Surrey RH1 6TW, United Kingdom. Tel: 01737 789772 eFax: 0870 0515681International tel (UK)+44 1737 789772International eFax: (UK)+44 870 0515681Email: adrian@clubtype.co.ukWebsite: http://www.clubtype.co.ukProducts received outside the United Kingdom may have been distributed to Users by an authorized Distributor. A list of Distributors is available from the Club Type website.February 2005

Mandalay

Regular

Shareware V1 - cbrown@eon.net.au

Chris Brown (visual design)

Chris Brown

cwfb

Copyright: Chris Brown (c) 1998 (all rights reserved)

Mandalay is a name i've always liked and this seemed like the appropriate easy going, casual font to put the name to.

MANDALAY was made by Chris Brown (visual design) It is not FREE, it is SHAREWARE.If required to use commercially, please email first.Chris Brown (cbrown@eon.net.au)A license fee is applicable. MANDALAY is not in the public domain and remains the exclusive property of Chris Brown. MANDALAY may not be redistributed in any way. That is: it may not be distributed commercially, it may not be sold,it may not be included on any form saleable package,it may not be converted or renamed,it may not be made available for download without the express written permission of Chris Brown.Chris Brown shall, in no event, be liable for any damages arising out of the use of this font.Remember MANDALAY is not free, it is shareware.

CFB1ShieldedAvengerSTRIPE1W00-BdIt

Regular

1.0

The Fontry

CFB1 Shielded Avenger STRIPE 1 Bold Italic is a trademark of The Fontry.

Copyright (c) 2009 by The Fontry. All rights reserved.

Copyright (c) 2009 by . All rights reserved.

Fenrir Runic

Regular

1.000

David Kerkhoff

David Kerkhoff

Fenrir Runic is a trademark of David Kerkhoff.

Copyright (c) 2010 by David Kerkhoff. All rights reserved.

Copyright (c) 2010 by David Kerkhoff. All rights reserved. Please read the ReadMe file for instructions and FAQ.

Donationware. Please read the 'ReadMe' file for instructions and FAQ.

Scream Real

Regular

OTF 1.000;PS 001.001;Core 1.0.29

Thomas W.Otto

Please refer to the Copyright section for the font trademark attribution notices.

Scream Real v1.1 - copyright (c) 2000 - Thomas W.Otto - Norfok Inc. - http://www.norfok.com

CopyrightThis Norfok Inc. product and the accompanying materials are copyrighted and contain proprietary information and trade secrets of Norfok Inc. Unauthorized copying of the product even if modified, merged, or included with other software, or of the written materials, is expressly forbidden. You may be held legally responsible for any infringement of Norfok Inc. intellectual property rights that is caused or encouraged by your failure to abide by the terms of this Agreement.copyright 2000 Norfok Inc.norfok@norfok.com

Jellyka - le Grand Saut Textual

Regular

1.00 November 22, 2008, initial release

Jellyka Nerevan

Typeface CuttyFruty. 2008. All Rights Reserved

This font was created using FontCreator 5.6 from High-Logic.com

Funland Park JL

Regular

1.00

Jeff's Fonts & Dingbats

Jeffrey N. Levine

Trademark of Jeffrey N. Levine

(c) 2001 by Jeffrey N. Levine.

Funland Park JL.

Freeware for commercial or non-commercial use. Resale or distribution in any form of media is strictly prohibited.

RobleAltW01-Medium

Regular

1.00

Daniel Hernandez

Daniel Hernandez

Roble Alt Medium is a trademark of Daniel Hernandez.

Copyright (c) 2013 by Daniel Hernandez. All rights reserved.

Copyright (c) 2013 by Daniel hernndez. All rights reserved.