CabritoSansW01-CnMediumItal

Regular

1.00

Jeremy Dooley

Jeremy Dooley

Cabrito is a trademark of Jeremy Dooley.

Copyright (c) 2014 by Jeremy Dooley. All rights reserved.

Copyright (c) 2014 by Jeremy Dooley. All rights reserved.

CongressSansW01-XBoldIt

Regular

1.00

Adrian Williams Design Ltd.

Adrian Williams

Copyright Adrian Williams Design Ltd 1985. Modified 2005, 2007. All rights reserved. Congress is a registered trade mark of Adrian Williams Design Ltd. This product is licensed, not sold, and may only be used in accordance with the terms specified in the License Agreement.

This software is digitally encoded and machine readable for output of the typeface licensed to you and is copyright 1985, with modifications 2005, 2007 Adrian Williams Design Ltd. Congress is a registered trade mark of Adrian Williams Design Ltd. All rights reserved.

End User License Agreement Adrian Williams Design Ltd (hereafter referred to as Supplier) grants the purchaser (hereafter referred to as End User) a non-exclusive license to use the items provided in this package, file or other delivery media which contains application software and digital outline font software (hereafter to be referred to as Products). DeliveryThe End User is bound by the terms of this Agreement upon one of the following;a) upon shipment by Distributor of any unsealed and accessible Products to End User;b) upon shipment by Distributor of any sealed Products to the End User that have been unsealed or opened by End User;c) upon shipment by Distributor of enabled Products or information subsequently enabling any Products that have been digitally password encrypted to prevent their unauthorised use.ReturnsThese Products and documentation may be returned for a full refund, unless unsealed, opened, used, received electronically in a useable state or decrypted which indicates End User acceptance of this agreement.RegistrationEnd User or Distributor of the Products must inform Supplier of a purchase or other distribution of Products, also known as registration, in order for the End User to receive the benefits of technical support, update information and data or media replacement. CPU use Products is licensed for use on up to 5 (five) central processing units (computers hereafter referred to as CPUs) at the same site, unless an additional written license has also been given. Products installed for network use on a single file server may be used for only one of the following; permanent installation on hard disks up to the number of CPUs licensed; or use on a network provided the number of terminals does not exceed the number of CPUs licensed. Use of the Products at different sites requires a separate written license.Output device use Products may be downloaded to (1) one hard disk of an output device for each multiple of 5 CPUs licensed. Off-site use A copy of the Products may be given to a Service Bureau or Printer provided; the Service Bureau or printer also has a license to use the Products; or an additional written license grants this right.EmbeddingProducts may be embedded into electronic documents on unlicensed CPUs provided that;a) electronic documents are distributed in a form that allows only printing and previewing but does not allow editing of the text in any way;b) electronic documents are for personal and or business use;If performance of the Products cannot be restricted to print and view only, the Products may only be used on licensed CPUs. An additional licence is also required to embed Products into, including but not limited to, hardware, software, application programs, printers, games, kiosk mode presentations, web pages, or any electronic documents which allow editing of the Products in any way.User may embed Products into electronic documents provided that;a) electronic documents are for personal useb) internal business use and will not be further distributedRights Products and documentation may not be copied except for one (1) copy only for back-up purposes or, such copies as may be necessary for installation and such copies must carry along with them any included copyright, trade mark, registration or proprietary information.Intellectual PropertyUser acknowledges the Product is the intellectual property of Adrian Williams Design Ltd together with the digital code, as organised in the Products and are protected by international treaty provisions and the applicable laws in the Country of use. User may not modify the source code of the Product as presently organised to create a derivative work or code based or derived from the Product, including but not limited to; changes in embedding restrictions, modification of letterforms, translation or conversion to other formats, reverse engineering, decryption, decompiling, disassembling, copying or alteration of source code, addition of characters, letterfroms or symbols.UsersUser agrees to inform its employees and authorized agents of the terms of this Agreement before being given access to the Products and such employees or agents will be bound by its terms.RefundsUser acknowledges that Products purchased are nonreturnable and nonrefundable except as provided in the foregoing terms of this Agreement.DamagesSuppliers cumulative liabilities for any loss or damage to User, other than that allowed by personal injury laws applying in that jurisdiction, shall not be greater than US30.00(thirty US Dollars).TransferUser may not sublicense, lend, rent lease or transfer the Product unless written permission is given to do so. User may transfer the Product to an outside agency such as commercial printer providing that person or organisation has also purchased a licence to use the Product on the commensurate number of CPUs.Other rights Supplier and its suppliers retain title and ownership in the Products (including the transfer media) and documentation which is protected by United Kingdom copyright and design right law. Except where stated above this agreement confers no intellectual property rights or ownership including but not limited to copyright and trade marks.TermThis license remains in effect until terminated by Supplier at any time for its own legal reasons or if End User fails to comply with this agreement. End User may terminate this agreement at any time by returning all Products and documentation, Supplier not being liable for any indemnity or refund. Limited liability Any limited or implied warranties are effective for a period of (90) days from proof of delivery date. Products should be free from errors in normal use. If the Products fails to comply with this warranty, Supplier will, at its own cost, replace defective media or refund the license fee except if misuse has caused the failure. Supplier will not warrant the performance of Products or documentation. If User fails to prove the Product was obtained from an authorized source, the Supplier shall have no responsibility to correct any faults. The foregoing states the sole extent of Supplier's breach of warranty and makes no warranties covering third party rights. Liability Under no circumstances will Supplier be liable to any party for any consequential, incidental or indirect damages, including loss of business, profits or information, interruption of business, etc., arising from use or misuse of the Products whether known or advised. The above limitations may not apply in certain jurisdictions of the world. Acknowledgment End User has read and acknowledged this agreement which supersedes all previous statements of agreement between End User and Supplier and agrees to be bound by its terms. This agreement inures to the benefit of Supplier and its licensors and their rights licensed under this agreement. Governing law This agreement is subject to change without notice and forms no commitment by Supplier and may not be amended except by written consent from Supplier. This agreement will be governed by the laws of the United Kingdom. Copyright Adrian Williams Design Limited trading as Club Type 1995-2005.Contacting UsAdrian Williams Design Ltd, also trades as Club Type, operating from:Buckland House, Grovehill Road, Redhill, Surrey RH1 6TW, United Kingdom. Tel: 01737 789772 eFax: 0870 0515681International tel (UK)+44 1737 789772International eFax: (UK)+44 870 0515681Email: adrian@clubtype.co.ukWebsite: http://www.clubtype.co.ukProducts received outside the United Kingdom may have been distributed to Users by an authorized Distributor. A list of Distributors is available from the Club Type website.February 2005

LILIMINGW00-Bold

Regular

1.00

Florent Courtaigne / Cubo Fonts

Florent Courtaigne

LILIMING is a trademark of Florent Courtaigne / Cubo Fonts.

Copyright (c) 2011 by Florent Courtaigne / Cubo Fonts. All rights reserved.

Copyright (c) 2011 by Florent Courtaigne. All rights reserved.

FilsonW01-MediumItalic

Regular

1.00

Mostardesign Studio - Olivier Gourvat

Mostardesign Studio - Olivier Gourvat

Filson Pro is a trademark of Mostardesign Studio.

Copyright (c) Olivier Gourvat - Mostardesign Studio, 2014. All rights reserved.

All Rights Reserved. This software is the property of Mostardesign Studio - 2004 / 2014Incorporated and its licensors, and may not be reproduced, used, displayed, modified, disclosed or transferred without the express written approval of Mostardesign. Please contact us to learn more about license restrictions.

ITCKickW01-Italic

Regular

1.00

Patty King

ITC is a trademark of International Typeface Corporation Registered in the U.S. Patent and Trademark Office and may be registered in certain jurisdictions;Kick is a trademark of International Typeface Corporation and may be registered in ce

Copyright 1997 International Typeface Corporation. All rights reserved.

Please review the description of this font at http://www.itcfonts.com.

Bala Cynwyd NF

Regular

1.002

Nick's Fonts

Nick Curtis

Copyright (c) 2001, 2006 Nick Curtis. All Rights Reserved. Distributed under non-exclusive license by 1001 Free Fonts.

By using or installing this font data, you (or you on behalf of your employer) agree to be bound by the terms of this Agreement. This Agreement constitutes the complete agreement between you and Nick's Fonts.YOU MAY:-Send a copy of any Nick's Fonts font data along with your documents to a commercial printer or other service bureau to enable the editing or printing of your document.-Use this font data to embed fonts within PostScript files or PDF files for distribution, viewing, and imaging to third parties.-Use this font for personal projects or for projects for which you are paid including, but not limited to, artwork, logotypes, personalized apparel, word art and web graphics.YOU MAY NOT:-Modify, adapt, translate, reverse engineer, decompile, disassemble or create derivative works based on the Nick's Fonts font data without Nick's Fonts's prior written consent.-Sell this font data AS FONT DATA to a third party under any circumstances including, but not limited to, rubber-stamp alphabets, die-cut alphabets, rub-on alphabets, or digitized fonts for embroidery. NICK'S FONTS SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THE NICK'S FONTS FONT DATA.

ActiumW00-Bold

Regular

1.20

Type Mafia

Gerben Dollen, Type Mafia

Actium is a trademark of Type Mafia.

Copyright (c) 2009 by Type Mafia. All rights reserved.

www.typemafia.com

Using this font requires a purchased End User License Agreement from Type Mafia. Order at www.typemafia.com

WishesOrnmTextW95-Regular

Regular

1.10

Sabrina Mariela Lopez

Sabrina Mariela Lopez

Wishes Script Ornaments Text is a trademark of Sabrina Mariela Lopez.

Copyright (c) 2013 Sabrina Mariela Lopez (typesenses@live.com.ar), with Reserved Font Name Wishes Script

Copyright (c) 2013 by Sabrina Mariela Lopez . All rights reserved.

Vario Com

Italic

1.10; 2006

Linotype GmbH

Hermann Zapf

Vario is a trademark of Heidelberger Druckmaschinen AG which may be registered in certain jurisdictions, exclusively licensed through Linotype GmbH.

Copyright (c) 2005 - 2006 Linotype GmbH, www.linotype.com. All rights reserved. This font software may not be reproduced, modified, disclosed or transferred without the express written approval of Linotype GmbH. Vario is a trademark of Heidelberger Druckmaschinen AG which may be registered in certain jurisdictions, exclusively licensed through Linotype GmbH. This typeface is original artwork of Hermann Zapf. The design may be protected in certain jurisdictions.

Vario is a bold brush-based design. Created by the renowned type designer and calligrapher Hermann Zapf, Vario offers superb emphasis for use in headlines and displays. It is availble in both regular and italic styles. Vario was first produced in 1982 for the Digiset typesetting system, manufactured by the German company Dr.-Ing. Rudolf Hell GmbH. In 1990, Linotype AG merged with Dr.-Ing Rudolf Hell GmbH, forming the Linotype-Hell AG (today Linotype GmbH). Since then, Linotype has been the official source of all fonts that were originally designed for the Hell Corporation. Linotype has also improved the typefaces using new technologies, including OpenType.

NOTIFICATION OF LICENSE AGREEMENTYou have obtained this typeface software either directly from Linotype GmbH or together with software distributed by one of Linotype's licensees.This software is a valuable asset of Linotype GmbH. Unless you have entered into a specific license agreement granting you additional rights, your use of this software is limited to your workstation for your own use. You may not copy or distribute this software. If you have any questions regarding your license terms, please review the license agreement you received with the software.General license terms and usage rights can be viewed at www.linotype.com/license.Generelle Lizenzbedingungen und Nutzungsrechte finden Sie unter www.linotype.com/license.Pour plus d'informacin concernant la contrat d'utilisation du logiciel de polices, veuillez consultez notre site www.linotype.com/license.Linotype GmbH can be contacted at:Tel.: +49(0)6172 484-418